FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Tonneau covers that fit the 2024-2026 Toyota Tacoma 6 ft bed

7 tonneau covers fit, 1 fit with a condition and 6 do not, by the makers' own fit charts. Among the fits: 4 hard quad-fold, 3 soft roll-up, 1 soft tri-fold.

By the FitsMyTruck team. Fit answers come from the makers' charts and install guides, with 14% of the entries taken from retailer listings where a maker publishes no chart; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Tonneau covers for the 2024-2026 Toyota Tacoma 6 ft bed: what to know first

For the 6 ft bed on the 2024-2026 Toyota Tacoma, seven covers fit, one fits with a condition and six are ruled out. This is the longer of the two Tacoma beds, with a floor length of 73.5 in against 60.3 in for the 5 ft bed. Wheel well width is 44.7 in, and the maker does not publish an inside width. Cab options are the XtraCab and the Double Cab. The truck's factory hardware matters for covers. The deck rail system with adjustable tie-down cleats is standard or part of a package by grade, and the TRD Pro-class grade lists an ARB modular bed utility bar. The tailgate is either a power open-and-close version with knee-lift assist (available) or a lightweight stamped version with damper.

Standouts by the makers' own figures

Highest load rating, lightest cover, longest warranty among the tonneau covers you can buy for this bed, taken from each maker's spec sheet.

Highest load rating you can buy

BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447

400 lb tied with 1 other

Cover type: hard quad-foldDistributed load rating: 400 lbCover weight: not published

Fits RealTruck lists BAK-448447 for 2024-2025 Toyota Tacoma with the 6ft 2in bed. Installation requires the deck rail system. Confirm with the maker before ordering.

Check price on Amazon
Lightest cover you can buy

Tyger T1 Soft Roll-Up TG-BC1T9202

25.22 lb

Cover type: soft roll-upDistributed load rating: not publishedCover weight: 25.22 lb

Fits Tyger TG-BC1T9202 fits the 6 ft (74 in) bed on 2024-2026 Toyota Tacoma. Tyger says it only fits trucks with the factory deck rail system.

Check price on Amazon
Longest warranty you can buy

Tyger T3 Soft Tri-Fold TG-BC3T1202

5 yr tied with 2 others

Cover type: soft tri-foldDistributed load rating: not publishedCover weight: 32.72 lb

Fits Tyger TG-BC3T1202 fits the 2024 to 2026 Toyota Tacoma with a 6-foot (74-inch) bed. Tyger says it only fits models with the factory Deck Rail System.

Check price on Amazon

Every tonneau cover made for this bed

Part numbers for this bed: Tyger Auto TG-BC1T9202, Tyger Auto TG-BC3T1202, Tyger Auto TG-BC4T4432, MOSTPLUS M04244902-SH, ACCESS (Agri-Cover) 15359, ACCESS (Agri-Cover) 35359, BAK Industries (RealTruck) BAK-448447. Match the part number on the listing before you order.

  • Tyger T1 Soft Roll-Up TG-BC1T9202

    • Fits
    • Cover typesoft roll-up
    • Cover weight25.22 lb
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    Tyger TG-BC1T9202 fits the 6 ft (74 in) bed on 2024-2026 Toyota Tacoma. Tyger says it only fits trucks with the factory deck rail system.

  • Tyger T3 Soft Tri-Fold TG-BC3T1202

    • Fits
    • Cover typesoft tri-fold
    • Cover weight32.72 lb
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    Tyger TG-BC3T1202 fits the 2024 to 2026 Toyota Tacoma with a 6-foot (74-inch) bed. Tyger says it only fits models with the factory Deck Rail System.

  • Tyger T4 Flip-Up Low Profile Hard Alloy Four-Fold TG-BC4T4432

    • Fits
    • Cover typehard quad-fold
    • Cover weight76.61 lb
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    Tyger TG-BC4T4432 fits the 2024 to 2026 Toyota Tacoma with a 6-foot (74-inch) bed, 2WD and 4WD. It only fits models with the factory deck rail system (Tyger's fit list calls it the utility rail system).

  • MOSTPLUS FRP Hard 4-Fold Tonneau Cover M04244902-SH

    • Fits
    • Cover typehard quad-fold
    • Distributed load rating350 lb
    • Warranty1 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    MOSTPLUS lists this 4-fold 6 ft FRP hard tonneau cover, On Top Style, for the 2024-2026 Toyota Tacoma. It fits only models with the factory deck rail system and excludes Trail Special Edition storage boxes.

  • ACCESS Original Roll-Up Cover 15359

    • Fits
    • Cover typesoft roll-up
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    ACCESS lists part 15359 for the Toyota Tacoma 6ft bed, for model years 2024 and 2025.

  • ACCESS LITERIDER Roll-Up Cover 35359

    • Fits
    • Cover typesoft roll-up
    • Warranty3 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    ACCESS lists part 35359 for the Toyota Tacoma 6ft bed, in both the 2024 and 2025 model years.

  • BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447

    • Fits
    • Cover typehard quad-fold
    • Distributed load rating400 lb
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    RealTruck lists BAK-448447 for 2024-2025 Toyota Tacoma with the 6ft 2in bed. Installation requires the deck rail system. Confirm with the maker before ordering.

  • BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447

    • Fits with condition
    • Cover typehard quad-fold
    • Distributed load rating400 lb
    • Warranty5 years
    • Install methodclamp-on, no drill
    Check price on Amazon

    RealTruck says the cover needs the deck rail system to install. If the truck does not have it, you can buy it from Toyota.

  • Tyger T1 Soft Roll-Up TG-BC1T9202

    • Does not fit
    • Cover typesoft roll-up
    • Cover weight25.22 lb
    • Warranty5 years
    • Install methodclamp-on, no drill

    Tyger says the TG-BC1T9202 cover only fits trucks with the factory deck rail system. It fits the 6 ft (74 in) bed on 2024-2026 Toyota Tacoma.

  • Tyger T3 Soft Tri-Fold TG-BC3T1202

    • Does not fit
    • Cover typesoft tri-fold
    • Cover weight32.72 lb
    • Warranty5 years
    • Install methodclamp-on, no drill

    Tyger TG-BC3T1202 fits the 2024 to 2026 Toyota Tacoma with a 6-foot (74-inch) bed. Tyger says it only fits models with the factory Deck Rail System.

  • Tyger T4 Flip-Up Low Profile Hard Alloy Four-Fold TG-BC4T4432

    • Does not fit
    • Cover typehard quad-fold
    • Cover weight76.61 lb
    • Warranty5 years
    • Install methodclamp-on, no drill

    Tyger TG-BC4T4432 fits the 2024 to 2026 Toyota Tacoma with a 6-foot (74-inch) bed, 2WD and 4WD. It only fits models with the factory deck rail system (Tyger's fit list calls it the utility rail system).

  • MOSTPLUS FRP Hard 4-Fold Tonneau Cover M04244902-SH

    • Does not fit
    • Cover typehard quad-fold
    • Distributed load rating350 lb
    • Warranty1 years
    • Install methodclamp-on, no drill

    MOSTPLUS says it fits only models with the factory deck rail system.

  • MOSTPLUS FRP Hard 4-Fold Tonneau Cover M04244902-SH

    • Does not fit
    • Cover typehard quad-fold
    • Distributed load rating350 lb
    • Warranty1 years
    • Install methodclamp-on, no drill

    MOSTPLUS says it excludes Trail Special Edition storage boxes.

  • MOSTPLUS FRP Hard 3-Fold Tonneau Cover

    • Does not fit
    • Cover typehard tri-fold
    • Distributed load rating350 lb
    • Warranty1 years
    • Install methodclamp-on, no drill

    MOSTPLUS lists no cover for this truck and bed length. That means no product is listed, not that a cover was found not to fit.

2024-2026 Toyota Tacoma 6 ft bed: by the numbers

400 lbmedian load rating across 3 tonneau covers (350 to 400 lb)
32.72 lbmedian cover weight across 3 tonneau covers (25.22 to 76.61 lb)
5 yrmedian warranty across 8 tonneau covers (1 to 5 yr)
50%are hard quad-fold, the most common type here
8 of 8can be bought on Amazon today
6products the makers rule out for this bed

Distributed load rating (lb): the 3 highest for this bed

BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447400
BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447400
MOSTPLUS FRP Hard 4-Fold Tonneau Cover M04244902-SH350

Figures are the makers' own. A tonneau cover with no published figure is left out.

How to choose for this bed

Seven part numbers from four makers fit. Tyger has the T1 soft roll-up (TG-BC1T9202, 25.22 lb), the T3 soft tri-fold (TG-BC3T1202, 32.72 lb) and the T4 hard quad-fold (TG-BC4T4432, 76.61 lb). MOSTPLUS has a hard 4-fold, M04244902-SH. ACCESS lists the Original (15359) and the LITERIDER (35359), both soft roll-ups. BAK lists the BAKFlip MX4 (GEN 3), BAK-448447. By type that is three soft roll-ups, one soft tri-fold and three hard quad-folds. The published load ratings are 350 lb on the MOSTPLUS and 400 lb on the BAK, so the highest load rating listed for a 6 ft Tacoma part number is 400 lb. Tyger and ACCESS publish none. Tyger weights run from 25.22 lb to 76.61 lb. Warranties are 1 year on the MOSTPLUS, 3 years on the LITERIDER and 5 years on the rest. The factory options that change the answer are the deck rail system, which Tyger T1, T3, the MOSTPLUS and the BAK tie to, and the Trail Special Edition storage box, which MOSTPLUS excludes.

Watch-outs before you buy

Six listings are ruled out. Three are Tyger covers (T1, T3 and T4) that do not fit trucks without the factory deck rail system. Two are the MOSTPLUS 4-fold, ruled out for trucks without the deck rail system and for trucks with Trail Special Edition storage boxes. The sixth is the MOSTPLUS 3-fold, where the maker lists no part number for this bed, which is not the same as a confirmed non-fit. The conditional fit is BAK-448447, which RealTruck says requires the deck rail system, available from Toyota. The RealTruck title reads Fits 2024-2025, while Tyger and MOSTPLUS name 2024-2026, so check the year on the listing if your truck is newer. Match the part number and the 6 ft bed before you buy.

Why a tonneau cover fits or does not

  • Tacoma 2024+ and some Tundra trims need the factory deck rail system; some covers require it, others exclude it. The exceptions: Tundra: ACCESS sells separate with and without deck rail parts
  • Factory bed storage boxes (Toyota Trail Special Edition, Silverado side boxes) exclude most covers. The exceptions: none observed
  • No SKU for this vehicle and bed length in the maker's own list; recorded as "no" with basis "no SKU in brand list", which is not a measured non-fit. The exceptions: a person should confirm before the site states a hard no
  • A cover SKU fits only the bed length it is made for; nominal bed lengths are rounded differently by makers (for example 5.5 ft, 5'7", 5'5", 67 in all mean the F-150 short bed). The exceptions: none observed

What on the 2024-2026 Toyota Tacoma decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

2beds offered: 5 ft (60.3 in), 6 ft (73.5 in)
2tailgate systems: power open-and-close tailgate with knee-lift assist (available), lightweight stamped tailgate with damper
2factory bed systems: deck rail system with adjustable tie-down cleats (standard or package by grade), ARB modular bed utility bar (listed on TRD Pro-class grade)
2cab styles: XtraCab, Double Cab

7 of the 7 tonneau covers made for the 5 ft bed are also made for this one, with a different part number for each bed length.

Before you buy tonneau covers for a Toyota Tacoma

Questions owners ask

Which tonneau covers fit a 2024 Tacoma with the 6 ft bed?

Seven part numbers fit: Tyger TG-BC1T9202, TG-BC3T1202 and TG-BC4T4432, MOSTPLUS M04244902-SH, ACCESS 15359 and 35359, and BAK-448447, which carries a deck rail condition.

How long is the 6 ft Tacoma bed?

The floor length is 73.5 in, against 60.3 in for the 5 ft bed, and the wheel well width is 44.7 in. Tyger labels its covers 6 ft (74 in) and RealTruck titles the BAK part as a 6 ft 2 in bed, so listings round the figure.

Is a 6 ft Tacoma tonneau cover limited to trucks with the deck rail system?

Several are. Tyger lists its T1 and T3 as fitting only models with the factory deck rail system, MOSTPLUS says the same for its 4-fold, and RealTruck says BAK-448447 installation requires it. For the T4, Tyger names the utility rail system instead.

What is the highest load rating listed for the 6 ft Tacoma?

BAK-448447 carries 400 lb, the highest listed. MOSTPLUS M04244902-SH follows at 350 lb. Tyger and ACCESS do not publish a distributed load rating.

Does a Tacoma Trail Special Edition storage box matter for covers?

For MOSTPLUS it does, because the maker excludes Trail Special Edition storage boxes on the 6 ft 4-fold. Factory bed storage boxes rule out most covers, so check before ordering.

How long are the warranties on 6 ft Tacoma covers?

Warranty is 5 years on the Tyger covers, the ACCESS Original and the BAK, 3 years on the ACCESS LITERIDER, and 1 year on the MOSTPLUS 4-fold.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

6 maker documents
  • Tyger Auto, manufacturer product page, read Oct 24, 2026
  • Tyger Auto, manufacturer product page, read Oct 24, 2026
  • Tyger Auto, manufacturer product page, read Oct 24, 2026
  • MOSTPLUS, manufacturer product feed (Shopify products.json), read Oct 24, 2026
  • Agri-Cover (ACCESS), manufacturer fitment finder (POST results), read Oct 24, 2026
  • RealTruck (BAK Industries), search-result title and summary of manufacturer product page (page not fetched, WAF challenge), read Oct 24, 2026
BAK Industries (RealTruck) BAKFlip MX4 (GEN 3) BAK-448447Check price on Amazon