We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
6 tonneau covers fit, 1 fit with a condition and 5 do not, by the makers' own fit charts. Among the fits: 3 soft roll-up, 3 hard quad-fold, 1 soft tri-fold.
These are the tonneau covers that have a part number for the 2024-2026 Toyota Tacoma with the 5 ft bed. Six fit, one fits with a condition, and five are ruled out. The 5 ft bed has a floor length of 60.3 in and a wheel well width of 44.7 in, and the maker does not publish an inside width. The 6 ft bed on the same truck runs 73.5 in, so confirm which one you have before opening a listing. The Tacoma is offered as an XtraCab or a Double Cab. Most listings lean on the factory deck rail system, which is standard or part of a package by grade. Two tailgates are listed, a power open-and-close tailgate with knee-lift assist (available) and a lightweight stamped tailgate with damper.
400 lb tied with 1 other
Cover type: hard quad-foldDistributed load rating: 400 lbCover weight: not published
Fits RealTruck lists BAK-448446 for 2024-2026 Toyota Tacoma with the 5ft bed. Installation requires the deck rail system, which you can buy from Toyota if the tru...
Check price on Amazon22.62 lb
Cover type: soft roll-upDistributed load rating: not publishedCover weight: 22.62 lb
Fits Tyger TG-BC1T9204 fits the 5 ft (60 in) bed on 2024-2026 Toyota Tacoma. Tyger says it only fits trucks with the factory deck rail system.
Check price on Amazon5 yr tied with 2 others
Cover type: soft tri-foldDistributed load rating: not publishedCover weight: 29.5 lb
Fits Tyger TG-BC3T1204 fits the 2024 to 2026 Toyota Tacoma with a 5-foot (60-inch) bed. Tyger says it only fits models with the factory Deck Rail System.
Check price on AmazonTyger TG-BC1T9204 fits the 5 ft (60 in) bed on 2024-2026 Toyota Tacoma. Tyger says it only fits trucks with the factory deck rail system.
Tyger TG-BC3T1204 fits the 2024 to 2026 Toyota Tacoma with a 5-foot (60-inch) bed. Tyger says it only fits models with the factory Deck Rail System.
Tyger TG-BC4T4431 fits the 2024 to 2026 Toyota Tacoma with a 5-foot (60-inch) bed, 2WD and 4WD. It only fits models with the factory deck rail system (Tyger's fit list calls it the utility rail system). Tyger says a factory bed storage box, like the one on the Trail Special Edition, may cause clearance problems and need to be removed.
ACCESS lists part 15349 for the Toyota Tacoma 5ft bed, for model years 2024 and 2025.
ACCESS lists part 35349 for the Toyota Tacoma 5ft bed, in both the 2024 and 2025 model years.
RealTruck lists BAK-448446 for 2024-2026 Toyota Tacoma with the 5ft bed. Installation requires the deck rail system, which you can buy from Toyota if the truck does not have it. Confirm with the maker before ordering.
RealTruck says the cover needs the deck rail system to install. If the truck does not have it, you can buy it from Toyota.
Tyger says the TG-BC1T9204 cover only fits trucks with the factory deck rail system. It fits the 5 ft (60 in) bed on 2024-2026 Toyota Tacoma.
Tyger TG-BC3T1204 fits the 2024 to 2026 Toyota Tacoma with a 5-foot (60-inch) bed. Tyger says it only fits models with the factory Deck Rail System.
Tyger TG-BC4T4431 fits the 2024 to 2026 Toyota Tacoma with a 5-foot (60-inch) bed, 2WD and 4WD. It only fits models with the factory deck rail system (Tyger's fit list calls it the utility rail system). Tyger says a factory bed storage box, like the one on the Trail Special Edition, may cause clearance problems and need to be removed.
MOSTPLUS lists no cover for this truck and bed length. That means no product is listed, not that a cover was found not to fit.
MOSTPLUS lists no FRP tonneau cover for this truck and bed length. That means no part is listed, not that a cover will not fit.
Four makers list covers for this bed. Tyger has three covers with part numbers: the T1 soft roll-up (TG-BC1T9204, 22.62 lb), the T3 soft tri-fold (TG-BC3T1204, 29.5 lb) and the T4 hard quad-fold (TG-BC4T4431, 67.02 lb). ACCESS adds two soft roll-ups, the Original (15349) and the LITERIDER (35349). BAK has one hard quad-fold, the BAKFlip MX4 (GEN 3), part BAK-448446. MOSTPLUS shows a hard 3-fold and a hard 4-fold, but no part number for this truck and bed. By type, the covers that fit are three soft roll-ups, one soft tri-fold and two hard quad-folds. Only BAK at 400 lb and MOSTPLUS at 350 lb publish a load rating, so the highest rating listed for a 5 ft Tacoma part number is 400 lb, on BAK-448446. Tyger weights run from 22.62 lb to 67.02 lb. Warranty runs from 1 year on MOSTPLUS and 3 years on the LITERIDER to 5 years on the Tyger covers, the ACCESS Original and the BAK. The factory option that changes the answer is the deck rail system, because Tyger and BAK both tie fit to a rail system.
Five listings are ruled out, for two different reasons. Three are Tyger covers that do not fit trucks without the factory deck rail system, since Tyger states they only fit models with it. The other two are the MOSTPLUS 3-fold and 4-fold, where the maker lists no part number for this truck and bed, which is not the same as a confirmed non-fit. The one conditional fit is BAK-448446. RealTruck says installation requires the deck rail system, which Toyota sells if the truck lacks it, and that statement comes from a search-result title rather than the maker's own page. Tyger also warns that the T4 (TG-BC4T4431) may have clearance issues with the Trail Special Edition factory bed storage box. Before you buy, match the part number, the 5 ft bed and the rail system on the listing.
7 of the 8 tonneau covers made for the 6 ft bed are also made for this one, with a different part number for each bed length.
Per the makers, six part numbers are listed for the 5 ft bed: Tyger TG-BC1T9204, TG-BC3T1204 and TG-BC4T4431, ACCESS 15349 and 35349, and BAK-448446. Tyger and BAK attach rail-system conditions, so confirm what your truck has.
Tyger says its T1 and T3 covers only fit models with the factory Deck Rail System. RealTruck says BAK-448446 installation requires it, and Toyota sells it if the truck lacks one. ACCESS gives no deck rail note for its two parts, so read their listings.
The floor length is 60.3 in and the wheel well width is 44.7 in. The 6 ft Tacoma bed is 73.5 in. The maker does not publish an inside width for either bed, so measure if clearance matters.
The highest load rating listed for a 5 ft Tacoma part number is 400 lb, on the BAKFlip MX4 (GEN 3), BAK-448446. MOSTPLUS lists 350 lb but has no part number for this bed, and Tyger and ACCESS do not publish a rating.
It can. Tyger says the T4 (TG-BC4T4431) may have clearance issues with the factory bed storage box on the Trail Special Edition, and the box would need to come out. Factory bed storage boxes also rule out most covers.
Tyger lists the T1 soft roll-up at 22.62 lb, the T3 soft tri-fold at 29.5 lb and the T4 hard quad-fold at 67.02 lb. ACCESS and BAK do not publish a cover weight.