FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Bed racks that fit the 2024-2026 Toyota Tacoma 5 ft bed

7 bed racks and toolboxes fit and 1 do not, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' own charts and install guides; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2024-2026 Toyota Tacoma 5 ft bed: what to know first

Racks and storage for the 2024-2026 Toyota Tacoma with the 5 ft bed come from four makers: Leitner, Front Runner, Prinsu and DECKED. That bed has a floor length of 60.3 in and a wheel well width of 44.7 in. The Tacoma comes in XtraCab and Double Cab versions, with a 6 ft bed at 73.5 in as the other length. Toyota lists a power open-and-close tailgate with knee-lift assist as available, a lightweight stamped tailgate with damper, and a deck rail system with adjustable tie-down cleats on some grades. The TRD Pro-class grade also lists an ARB modular bed utility bar. Of the 8 products, 7 fit, none fits only under a condition and 1 does not. One of them, the Leitner TONNEAU rack only, carries a maker exclusion for Trail Special Edition bed storage boxes, so the factory bed equipment on your truck decides part of the answer.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 00-4GTT5A-1744, Leitner Designs 00-5.0NSA-1596, Leitner Designs 00-50-FTA-1375, Front Runner KRTT900T, DECKED YT7, DECKED YT9. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 00-4GTT5A-1744

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 00-4GTT5A-1744 for the 2024 and newer Toyota Tacoma with a short bed.

  • Leitner ACS FORGED NDNS 00-5.0NSA-1596

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-5.0NSA-1596 is the Forged NDNS bed rack for the 2005 to 2025 Toyota Tacoma with a short bed.

  • Leitner ACS FORGED TONNEAU rack only 00-50-FTA-1375

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-50-FTA-1375 is the Forged Tonneau rack (rack only, no cover) for the 2005 to 2026 Toyota Tacoma Double Cab with a short bed. Leitner says it will not fit with the Trail Special Edition bed storage boxes.

  • Front Runner Slimline II Load Bed Rack Kit KRTT900T

    • Fits
    • Mount typeT-slot bed rail
    No Amazon listing found

    Front Runner KRTT900T is the Slimline II load bed rack kit for the 2005 and newer Toyota Tacoma with OEM bed rails. Front Runner does not give a bed length.

  • Prinsu CBI Bed Bars

    • Fits
    • Static load1,000 lb
    • Dynamic (driving) load600 lb
    No Amazon listing found

    Prinsu says these universal bed bars are designed to fit most truck beds, and the crossbar width adjusts from 51 to 70 inches. Prinsu does not list a year or bed length. Factory bed rails need to be removed before installation.

  • Check price on Amazon

    Per DECKED's fitment guide, the 2024-current Toyota Tacoma with a 5 ft 1 in bed takes drawer system SKU YT7.

  • Check price on Amazon

    Per DECKED's fitment guide, the 2024-current Toyota Tacoma with the Power Accessory Bed with a 5 ft 1 in bed takes drawer system SKU YT9. This is the Power Accessory Bed variant.

  • DECKED Tool Box

    • Does not fit

    The maker's fitment chart shows the Tool Box as not available for this midsize truck, and it says the Tool Box fits full-size trucks.

2024-2026 Toyota Tacoma 5 ft bed: by the numbers

1,400 lbmedian static load across 4 bed racks and toolboxes (1,000 to 1,400 lb)
800 lbmedian dynamic load across 4 bed racks and toolboxes (600 to 800 lb)
23 inmedian height above rail across 4 bed racks and toolboxes (9.25 to 23 in)
29%are T-slot bed rail, the most common type here
2 of 7can be bought on Amazon today
1product the makers rule out for this bed

Static load (lb): the 4 highest for this bed

Leitner ACS FORGED Active Cargo System 00-4GTT5A-17441,400
Leitner ACS FORGED NDNS 00-5.0NSA-15961,400
Leitner ACS FORGED TONNEAU rack only 00-50-FTA-13751,400
Prinsu CBI Bed Bars 1,000

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

Leitner has 3 products: the ACS FORGED (00-4GTT5A-1744), the NDNS (00-5.0NSA-1596) and the TONNEAU rack only (00-50-FTA-1375). Front Runner has 1, the Slimline II Load Bed Rack Kit, KRTT900T. Prinsu has 1, the CBI Bed Bars. DECKED has 3 products: the Tool Box, which does not fit, and two Drawer Systems, YT7 and YT9. The load figures spread from 1000 lb static and 600 lb dynamic (driving) on the Prinsu bars to 1400 lb static and 800 lb dynamic on all three Leitner racks. So the highest rating is 1400 lb static, held by Leitner, and the lowest is 1000 lb, held by Prinsu. Front Runner and DECKED list no load figure. Mount types: C-channel clamp on the ACS FORGED, T-slot bed rail on the TONNEAU rack and the Front Runner kit. Prinsu's crossbar width adjusts from 51 to 70 in. Factory options matter here. The Front Runner kit is listed for Tacomas with OEM bed rails, Prinsu needs the factory bed rails removed, and the YT9 drawer system is for the Power Accessory Bed variant.

Watch-outs before you buy

The DECKED Tool Box does not fit. DECKED lists it as N/A for this midsize truck, and says the Tool Box fits full-size trucks. The Leitner TONNEAU rack only is listed for a Tacoma Double Cab, 2005-2026, short bed, and the maker says it will not fit with Trail Special Edition bed storage boxes. Prinsu's page warns that the factory bed rails need to be removed prior to installation, and it lists no year or bed length. Front Runner's page for the KRTT900T gives no bed length either. Pick between YT7 and YT9 by whether your truck has the Power Accessory Bed. Before buying, match the part number, the 5 ft bed and your cab style.

What on the 2024-2026 Toyota Tacoma decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

2beds offered: 5 ft (60.3 in), 6 ft (73.5 in)
2tailgate systems: power open-and-close tailgate with knee-lift assist (available), lightweight stamped tailgate with damper
2factory bed systems: deck rail system with adjustable tie-down cleats (standard or package by grade), ARB modular bed utility bar (listed on TRD Pro-class grade)
2cab styles: XtraCab, Double Cab

7 of the 7 bed racks and toolboxes made for the 6 ft bed are also made for this one, with a different part number for each bed length.

Before you buy racks and toolboxes for a Toyota Tacoma

Questions owners ask

What size is the 2024 Tacoma 5 ft bed?

The 5 ft bed has a floor length of 60.3 in and a wheel well width of 44.7 in. The 6 ft Tacoma bed is 73.5 in long on the floor.

Which DECKED drawer system fits a 2024 Tacoma 5 ft bed?

DECKED lists SKU YT7 for the Toyota Tacoma (2024-current) 5' 1". Trucks with the Power Accessory Bed use YT9. The Tool Box does not fit this midsize truck per the maker.

Does the Leitner rack fit a Tacoma with Trail Special Edition bed boxes?

Not the TONNEAU rack only, 00-50-FTA-1375. The maker says it will not fit with Trail Special Edition bed storage boxes. The other two Leitner racks carry no such exclusion.

Do I need to remove the factory bed rails for Prinsu bed bars?

Yes, per Prinsu's page, which warns that factory bed rails need to be removed before installation. The bars carry 1000 lb static and 600 lb dynamic (driving), and the crossbars adjust 51 to 70 in.

What is the highest load rating among 2024 Tacoma bed racks here?

1400 lb static and 800 lb dynamic (driving), shared by the three Leitner racks: 00-4GTT5A-1744, 00-5.0NSA-1596 and 00-50-FTA-1375. Prinsu lists 1000 lb static and 600 lb dynamic.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

4 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • Dometic (Front Runner), manufacturer product page (HTML), read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026
DECKED Drawer System YT7Check price on Amazon