We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
17 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1.5 to 3.5 inches.
Fabtech's footnotes shape most of what fits the 2024-2026 Tacoma, so it helps to start with the truck. It comes in XtraCab and Double Cab, with a 5ft bed (60.3 in floor length) or a 6ft bed (73.5 in). The tailgate is either a power open-and-close unit with knee-lift assist, available, or a lightweight stamped tailgate with damper, and the deck rail system with adjustable tie-down cleats is standard or in a package by grade. The TRD Pro-class grade lists an ARB modular bed utility bar. There are 17 lift and leveling kits for this truck, and all 17 fit; none fits with a condition and none is ruled out by the maker. Fabtech makes five and Zone Offroad Products twelve. Both list 2024-2026.
3.5 in
Kit type: spacer liftFront lift: 3.5 inRear lift: 2 in
Fits Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma Base. It uses shock relocation.
Check price on Amazon1.5 in
Kit type: leveling kitFront lift: 1.5 inRear lift: 0 in
Fits Fabtech lists this kit for 2024-2026 Tacoma, 2WD and 4WD. Some trucks may not sit level after install. It does not fit TRD Pro or TrailHunter models, models ...
Check price on AmazonFabtech lists this kit for 2024-2026 Tacoma, 2WD and 4WD. Some trucks may not sit level after install. It does not fit TRD Pro or TrailHunter models, models with Adaptive Variable Suspension (AVS) shocks, or models with rear leaf springs.
For 4WD Tacomas only. Fabtech says it covers 2024 to 2026 models. It does not fit TRD Pro or TrailHunter models, trucks with rear leaf springs, or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tacomas only. Fabtech says it covers 2024 to 2026 models. It does not fit TRD Pro or TrailHunter models, trucks with rear leaf springs, or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tacomas only. Fabtech says it covers 2024 to 2026 models. It does not fit TRD Pro or TrailHunter models, trucks with rear leaf springs, or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tacomas only. Fabtech says it covers 2024 to 2026 models. It does not fit TRD Pro or TrailHunter models, trucks with rear leaf springs, or trucks with Adaptive Variable Suspension (AVS) shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma Base. It does not include shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma Base, with FOX Adventure Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma Base, with Nitro Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma TRD-Off Road. It does not include shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma TRD-Off Road, with FOX Adventure Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 2 inch leveling kit for the Toyota Tacoma TRD-Off Road, with Nitro Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma Base. It uses shock relocation.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma Base, with FOX Adventure Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma Base, with Nitro Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma TRD Off-Road. It uses shock relocation.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma TRD Off-Road, with FOX Adventure Series shocks.
Fits 4WD trucks only, and the maker lists it for 2024-2026. This is the 3.5 inch lift kit for the Toyota Tacoma TRD Off-Road, with Nitro Series shocks.
The 17 kits are seven leveling kits, eight spacer lifts and two coilover lifts. Front lift runs from 1.5 in to 3.5 in, a narrow spread. The low end is the Fabtech FTL5607 at 1.5 in. The six Zone leveling kits (the ZONT18 and ZONT19 families) give 2 in front and 0 in rear. The top end is the six Zone 3.5 inch kits, the ZONT20 and ZONT21 families, at 3.5 in front and 2 in rear. Fabtech's four 3 inch kits give 3 in front, with K7102 and K7105 as spacer lifts and K7103DL and K7106DL as coilover lifts, and no rear figure is published for them. No kit lists a largest tire. Zone splits by trim: ZONT18 and ZONT20 are named for the Tacoma Base, ZONT19 and ZONT21 for the TRD Off-Road. Each comes plain (No Shock on the leveling kits, Shock Relocation on the 3.5 inch kits, both reusing factory shocks), as an F version with FOX Adventure Series shocks or as an N version with Nitro Series. Only the FTL5607 fits both 2WD and 4WD.
No kit is ruled out by its maker, so the limits sit in the footnotes. All five Fabtech kits exclude TRD Pro models, models with Adaptive Variable Suspension (AVS) shocks, models with rear leaf springs and TrailHunter models. Fabtech also warns that some trucks may not sit level after the FTL5607 goes on. The Zone kit names cover Base and TRD Off-Road only, so none is written for the TRD Pro, even though that grade lists the ARB bed utility bar. Zone does not mention TrailHunter. Match the part number and the F or N suffix to your trim and shock choice, and confirm drive: sixteen of the 17 kits are 4WD only.
4 of the 20 lift and leveling kits made for the 2016-2023 Toyota Tacoma are also made for this truck.
Not from the makers covered here. Fabtech says all five of its kits do not fit TRD Pro models, and the Zone kit names cover only the Tacoma Base and TRD Off-Road. Check with the maker for TRD Pro fitment.
Only the Fabtech FTL5607 1.5 inch leveling system fits 2WD and 4WD. The other sixteen kits are 4WD only. Fabtech notes that some trucks may not sit level after install.
The six Zone 3.5 inch kits, ZONT20 and ZONT21 with F and N versions, give 3.5 in front and 2 in rear. All are 4WD only. The plain versions reuse the factory shocks, and the F and N versions include shocks.
Fabtech says all five of its kits do not fit TrailHunter models. Zone names the Tacoma Base and TRD Off-Road and does not mention the TrailHunter, so confirm with Zone first.
ZONT18F is the FOX Adventure Series version and ZONT18N is the Nitro Series version of the same kit. The plain number, such as ZONT18, is the No Shock version, or Shock Relocation on the 3.5 inch kits.