We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
4 tonneau covers fit and 5 do not, by the makers' own fit charts. Among the fits: 4 soft roll-up.
Every part number for the 2022-2026 Toyota Tundra Long Bed comes from ACCESS. The Long Bed is the 8.1 ft box, with a floor length of 96.5 in and a wheel well width of 48.7 in. The maker does not publish an inside width. Nine covers were checked for this bed: four fit, none fit only with a condition and five are ruled out, and in all five the maker lists no part number for this bed. The Tundra is offered as a Double Cab or a CrewMax. The other beds on the truck are the Short Bed at 65.6 in and the Standard Bed at 77.6 in. Factory features that show up in the conditions are the deck rail system with four adjustable tie-down cleats, and the power open-and-close tailgate with hands-free knee-lift assist, offered by grade. ACCESS names this bed 8 ft 1 in.
5 yr tied with 1 other
Cover type: soft roll-upDistributed load rating: not publishedCover weight: not published
Fits ACCESS lists part 15309 for the Toyota Tundra 8ft 1in bed without deck rail, for model years 2022 and 2026.
Check price on AmazonACCESS lists part 15309 for the Toyota Tundra 8ft 1in bed without deck rail, for model years 2022 and 2026.
ACCESS lists part 15339 for the Toyota Tundra 8ft 1in bed with deck rail, for model years 2022 and 2026.
ACCESS lists part 35309 for the Toyota Tundra 8ft 1in bed without deck rail, in both the 2022 and 2026 model years.
ACCESS lists part 35339 for the Toyota Tundra 8ft 1in bed with deck rail, in both the 2022 and 2026 model years.
Tyger lists no T1 part number for this truck and bed length. That means no product is listed, not that a fit has been ruled out.
Tyger lists no T3 part number for this truck and bed length. That means no product is listed, not that a fit has been ruled out.
Tyger lists no T4 part number for this truck and bed length. That means no product is listed, not that a fit has been ruled out.
MOSTPLUS lists no cover for this truck and bed length. That means no product is listed, not that a cover was found not to fit.
MOSTPLUS lists no FRP tonneau cover for this truck and bed length. That means no part is listed, not that a cover will not fit.
The choice here is narrower than on the shorter Tundra beds. The four covers that fit are all ACCESS soft roll-ups: the Original in 15309 (without deck rail) and 15339 (with deck rail), and the LITERIDER in 35309 (without deck rail) and 35339 (with deck rail). By type that is four soft roll-ups, and no hard cover has a listed part number for this bed. The Tyger T1 soft roll-up, the T3 soft tri-fold and the T4 hard quad-fold show no part number for this bed, and neither do the MOSTPLUS 3-fold and 4-fold. MOSTPLUS publishes a 350 lb load rating on those covers, but that does not help on this bed. No load ratings or cover weights are published for the ACCESS parts, so there is nothing to compare there. The one published difference is warranty: 5 years on the Original and 3 years on the LITERIDER. So the decision is two steps. First, decide whether your truck has the factory deck rail system, since that selects the part number. Second, choose the Original or the LITERIDER on the warranty and the listing details.
The five ruled-out covers are not measured non-fits. For the Tyger T1, T3 and T4, and for the MOSTPLUS 3-fold and 4-fold, the maker lists no part number for this vehicle and bed length, as read on 2026-10-24. If you want a hard folding cover for the Long Bed, none has a part number listed. Do not substitute a Standard Bed or Short Bed part number, because a cover part number fits only the bed length it is made for. No BAK part number is recorded for this bed. ACCESS's lookup was checked for model years 2022 and 2026, so confirm the year on the listing. Match the part number to 8 ft 1 in and to your deck rail setup before buying.
4 of the 13 tonneau covers made for the 5.5 ft bed are also made for this one, with a different part number for each bed length. 4 of the 10 tonneau covers made for the 6.5 ft bed are also made for this one, with a different part number for each bed length.
Four ACCESS part numbers fit: Original 15309 and 15339, and LITERIDER 35309 and 35339. All four are soft roll-ups. No Tyger, MOSTPLUS or BAK part number is recorded for this bed.
No. The Tyger T4 and both MOSTPLUS folding covers have no part number listed for this vehicle and bed length, which means no product is listed rather than a measured non-fit.
ACCESS lists 15309 for the 8 ft 1 in bed without deck rail and 15339 for the bed with deck rail. The LITERIDER follows the same split, 35309 and 35339. Pick the one that matches your truck's rail setup.
The floor length is 96.5 in and the wheel well width is 48.7 in. The Standard Bed is 77.6 in and the Short Bed is 65.6 in. A cover part number fits only the bed length it is made for.
ACCESS lists 5 years on the Original and 3 years on the LITERIDER. No distributed load rating or cover weight is published for either, so check the listing for those figures.