We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
25 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1.5 to 6 inches.
The 2022-2026 Toyota Tundra has 25 lift and leveling kits, and the makers list all 25 as fitting. None fits with a condition and none is ruled out, but the maker footnotes carry exclusions that matter, and they are covered below. The truck comes as a Double Cab or a CrewMax with three beds: the Short Bed at 5.5 ft nominal (65.6 in floor length), the Standard Bed at 6.5 ft (77.6 in) and the Long Bed at 8.1 ft (96.5 in). Kits work on the suspension, so they do not change with bed length. The tailgate is a power open-and-close unit with hands-free knee-lift assist, offered by grade, and the deck rail system carries four adjustable tie-down cleats. Fabtech makes fifteen of the kits and Zone Offroad Products makes ten. Both makers list 2022-2026.
6 in tied with 1 other
Kit type: full suspension liftFront lift: 6 inRear lift: 4.5 in
Fits 6 inch lift kit for the Toyota Tundra, 4WD only. Zone lists it for 2022 to 2026 models. It is the FOX Adventure Series version.
Check price on Amazon35 in tied with 10 others
Kit type: spacer liftFront lift: 3 inRear lift: not published
Fits For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or tru...
Check price on Amazon1.5 in
Kit type: leveling kitFront lift: 1.5 inRear lift: 0 in
Fits Fabtech lists this kit for 2022-2026 Tundra, 2WD and 4WD. Some trucks may not sit level after install, and it does not fit TRD Pro models.
Check price on AmazonFabtech lists this kit for 2022-2026 Tundra, 2WD and 4WD. Some trucks may not sit level after install, and it does not fit TRD Pro models.
For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear coil springs. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear air bags. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear air bags. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear air bags. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear air bags. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only, with factory rear air bags. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit hybrids or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit TRD Pro models or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit TRD Pro models or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit TRD Pro models or trucks with Adaptive Variable Suspension (AVS) shocks.
For 4WD Tundras only. Fabtech says it covers 2022 to 2026 models. It fits CrewMax models only and does not fit TRD Pro models or trucks with Adaptive Variable Suspension (AVS) shocks.
Zone's 2-inch lift kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version does not include shocks.
Zone's 2-inch lift kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version comes with FOX Adventure Series shocks.
Zone's 2-inch lift kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version comes with Nitro Series shocks.
Zone's 2-inch leveling kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version does not include shocks.
Zone's 2-inch leveling kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version comes with FOX Adventure Series shocks.
Zone's 2-inch leveling kit is for 4WD Tundras only. Zone says it covers 2022 to 2026 models. This version comes with Nitro Series shocks.
6 inch lift kit for the Toyota Tundra, 4WD only. Zone lists it for 2022 to 2026 models. It is the FOX Adventure Series version.
6 inch lift kit for the Toyota Tundra, 4WD only. Zone lists it for 2022 to 2026 models. It is the Nitro Series version.
Fits 4WD trucks only, and the maker lists it for 2022-2026. This is the 3.25 inch lift kit for the Toyota Tundra, with FOX Adventure Series shocks.
Fits 4WD trucks only, and the maker lists it for 2022-2026. This is the 3.25 inch lift kit for the Toyota Tundra, with Nitro Series shocks.
The 25 kits split into four leveling kits, thirteen spacer lifts, six coilover lifts and two full suspension lifts. Leveling kits raise the front only. The Fabtech FTL5606 gives 1.5 in up front, the lowest lift of the 25, and the three Zone ZONT9 kits give 2 in, all with 0 in at the rear. The Fabtech 3 inch kits give 3 in up front, and no rear figure is published for them. Zone's 2 inch lift (ZONT10, ZONT10F, ZONT10N) adds 1 in at the rear and its 3.25 inch lift (ZONT16F, ZONT16N) adds 1.75 in. The highest lift listed is the Zone 6 inch kit, ZONT14F and ZONT14N, at 6 in front and 4.5 in rear. Only twelve of the 25 kits list a largest tire, and the figure is 35 in each time. The factory options matter next. Fabtech's K7086 to K7088DL name factory rear coil springs, and K7089 to K7091DL name factory rear air bags. Those ten also exclude hybrid models. The Zone kits come as a plain No Shock version that reuses factory shocks (ZONT9, ZONT10) or as FOX Adventure Series (F) and Nitro Series (N) versions with shocks included.
No kit is ruled out by its maker, so the warnings sit in the maker footnotes. All fourteen Fabtech 3 inch kits say they fit CrewMax models only and exclude models with Adaptive Variable Suspension (AVS) shocks. Ten of them also exclude hybrids. The four kits K7107M, K7108M, K7110DL and K7112DL, along with the FTL5606, exclude TRD Pro models, and Fabtech adds that some trucks may not sit level after the FTL5606 goes on. Drive matters too: twenty-four of the 25 kits are 4WD only, and the FTL5606 is the one that fits both 2WD and 4WD. Zone states no cab, hybrid or trim exclusions, so confirm those with the maker. Match the full part number, because suffixes such as DL and M separate otherwise similar kits, and the maker listings do not explain them.
1 of the 17 lift and leveling kits made for the 2007-2021 Toyota Tundra are also made for this truck.
Only the Fabtech FTL5606 1.5 inch leveling system fits 2WD and 4WD. The other twenty-four kits are 4WD only. The maker notes that some trucks may not sit level after install and that the kit will not fit TRD Pro models.
The maker footnotes on all fourteen Fabtech 3 inch kits say they fit CrewMax models only, so none of them is listed for the Double Cab. The Fabtech FTL5606 and the Zone kits carry no cab restriction.
The Zone Offroad 6 inch kits, ZONT14F (FOX Adventure Series) and ZONT14N (Nitro Series), give 6 in front and 4.5 in rear. Both are 4WD only, include shocks and list a largest tire of 35 in.
Fabtech says the ten kits K7086 through K7091DL do not fit hybrid models, and all fourteen Fabtech 3 inch kits do not fit AVS shocks. Zone states neither exclusion, so ask the maker before ordering.
Leveling kits add 0 in at the rear. The Zone 2 inch lift adds 1 in, the 3.25 inch lift adds 1.75 in and the 6 inch lift adds 4.5 in. No rear figure is published for the fourteen Fabtech 3 inch kits.