FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Bed racks that fit the 2022-2026 Toyota Tundra 5.5 ft bed

6 bed racks and toolboxes fit, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' charts and install guides, with 17% of the entries taken from retailer listings where a maker publishes no chart; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2022-2026 Toyota Tundra 5.5 ft bed: what to know first

Six bed rack and toolbox products fit the 2022-2025 Toyota Tundra with the 5.5 ft short bed, and none of them fits only with a condition or is ruled out. The maker figures for this bed are a floor length of 65.6 in and a wheel well width of 48.7 in. The Tundra also comes with a 6.5 ft standard bed at 77.6 in and an 8.1 ft long bed at 96.5 in. Cab styles are Double Cab and CrewMax. The bed carries a deck rail system with four adjustable tie-down cleats, and the tailgate is a power open-and-close unit with hands-free knee-lift assist on certain grades. Toyota states a Class-IV receiver, but the opening size is not published. Check that the bed length on every listing is the short bed.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 04-62-FA-1511, Leitner Designs 00-5.6NSA-1708, Leitner Designs 00-56-FTA-1376, DECKED XT3, DeeZee DZ8170SB. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 04-62-FA-1511

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 04-62-FA-1511 for the 2022 and newer Toyota Tundra with a 5 ft 6 in bed.

  • Leitner ACS FORGED NDNS 00-5.6NSA-1708

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-5.6NSA-1708 is the Forged NDNS bed rack for the 2022 and newer Toyota Tundra with a 5 ft 6 in bed.

  • Leitner ACS FORGED TONNEAU rack only 00-56-FTA-1376

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-56-FTA-1376 is the Forged Tonneau rack (rack only, no cover) for the 2007 to 2026 Toyota Tundra CrewMax with a 5 ft 7 in bed. Leitner says it will not fit with the Trail Special Edition bed storage boxes.

  • DECKED Tool Box

    • Fits
    No Amazon listing found

    The maker's fitment chart shows Tool Box options for the 2022-current Toyota Tundra with a 5 ft 5 in bed. The Tool Box fits nearly every full-size truck from 2001 to today, but not RamBox, service bodies, the GMC CarbonPro bed, Chevy Silverado EV, Ford F-150 Heritage Edition or Nissan Titan.

  • No Amazon listing found

    DECKED lists drawer system SKU XT3 for the 2022-current Toyota Tundra with a 5 ft 5 in bed.

  • DeeZee HARDware Series Crossover Tool Box DZ8170SB

    • Fits
    Check price on Amazon

    DeeZee lists DZ8170 for the 2007-2026 Tundra with a 5.5 ft bed. Confirm with the maker before ordering.

2022-2026 Toyota Tundra 5.5 ft bed: by the numbers

1,400 lbmedian static load across 3 bed racks and toolboxes (1,400 to 1,400 lb)
800 lbmedian dynamic load across 3 bed racks and toolboxes (800 to 800 lb)
23 inmedian height above rail across 3 bed racks and toolboxes (23 to 23 in)
17%are C-channel clamp, the most common type here
1 of 6can be bought on Amazon today
50%of these bed racks and toolboxes publish a static load

Static load (lb): the 3 highest for this bed

Leitner ACS FORGED Active Cargo System 04-62-FA-15111,400
Leitner ACS FORGED NDNS 00-5.6NSA-17081,400
Leitner ACS FORGED TONNEAU rack only 00-56-FTA-13761,400

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

The six products divide evenly: three racks and three storage products. The racks are all Leitner ACS FORGED, namely the Active Cargo System (04-62-FA-1511, C-channel clamp), the NDNS (00-5.6NSA-1708) and the TONNEAU rack only (00-56-FTA-1376, T-slot bed rail). All three share the same ratings, 1400 lb static and 800 lb dynamic (driving), so the choice between them is about mounting and your bed hardware, not capacity. The storage side is the DECKED Tool Box, the DECKED Drawer System (XT3) and the DeeZee HARDware Series Crossover Tool Box (DZ8170SB), and none of them publishes a load rating. Trim matters for one product. The TONNEAU rack only is listed with a note that it will not fit with the Trail Special Edition bed storage boxes. It is also filed under the Tundra CrewMax 2007-2026 with a 5-7 bed label, so the maker's label differs from the 5.5 ft short bed. The Active Cargo System and NDNS are listed for the Tundra 2022 and newer with a 5-6 bed.

Watch-outs before you buy

Read the TONNEAU rack only listing, 00-56-FTA-1376, with care. The maker says it will not fit with the Trail Special Edition bed storage boxes, and it is filed under a Tundra CrewMax 2007-2026 5-7 bed rather than the 5-6 label on the other two Leitner products. The DeeZee DZ8170SB is listed for a Tundra 5.5 ft bed from 2007 to 2026, but that comes from a search summary rather than DeeZee's own product page, so confirm it with DeeZee before ordering. DECKED lists the Tool Box as "See Options" with no single part number. Confirm the short bed, your trim and the part number on the Amazon listing before you buy.

What on the 2022-2026 Toyota Tundra decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

3beds offered: 5.5 ft (65.6 in), 6.5 ft (77.6 in), 8.1 ft (96.5 in)
1tailgate system: power open-and-close tailgate with hands-free knee-lift assist (by grade)
1factory bed system: deck rail system with four adjustable tie-down cleats
2cab styles: Double Cab, CrewMax

6 of the 6 bed racks and toolboxes made for the 6.5 ft bed are also made for this one, with a different part number for each bed length. 1 of the 1 bed racks and toolboxes made for the 8.1 ft bed are also made for this one, with the same part numbers.

Before you buy racks and toolboxes for a Toyota Tundra

Questions owners ask

What bed rack fits a 2022-2025 Tundra with the 5.5 ft bed?

The maker lists the Leitner ACS FORGED Active Cargo System, part number 04-62-FA-1511, for the Toyota Tundra 2022 and newer with the 5-6 bed. It uses a C-channel clamp and is rated 1400 lb static and 800 lb dynamic.

Does the Leitner tonneau rack fit a Tundra Trail Special Edition?

Not with the bed storage boxes. The maker lists the TONNEAU rack only, part number 00-56-FTA-1376, as one that will not fit with the Trail Special Edition bed storage boxes.

Which DECKED drawer system fits a Tundra 5.5 ft bed?

DECKED lists SKU XT3 for the Toyota Tundra (2022-current) 5 ft 5 in bed. For the same truck, DECKED lists the Tool Box as "See Options" rather than naming a part number.

What are the bed dimensions of the 2022-2025 Tundra short bed?

The maker figures for the short bed are a floor length of 65.6 in and a wheel well width of 48.7 in. The standard bed is 77.6 in long and the long bed is 96.5 in.

What is the load rating for Tundra short bed racks?

All three Leitner racks for the Tundra short bed are listed at 1400 lb static and 800 lb dynamic (driving). The DECKED and DeeZee storage products publish no load rating, so no figure is given for them.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

3 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026
  • DeeZee, manufacturer product page (HTML) not fetched directly: Cloudflare 403; values read from a search-engine extract of the page, read Oct 24, 2026
DeeZee HARDware Series Crossover Tool Box DZ8170SBCheck price on Amazon