We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
11 tonneau covers fit and 1 do not, by the makers' own fit charts. Among the fits: 7 soft roll-up, 2 hard quad-fold, 1 soft tri-fold, 1 hard tri-fold.
These are the tonneau covers for the 6 ft 6 in bed on a 2014-2018 Chevrolet Silverado 1500 in Regular Cab, Double Cab or Crew Cab. The bed has a floor length of 78.9 in, an inside width of 64.6 in and a wheel well width of 51 in. ACCESS calls it 6ft 6in, MOSTPLUS says 6.5 ft and Tyger says 6 ft 7 in. Eleven covers have a maker listing for this bed, and one does not: the Tyger T4 four-fold, for which Tyger's application list shows no SKU. That means Tyger lists no product for this bed, not that the cover was measured and found not to fit. The eleven are six ACCESS part numbers, two Tyger soft covers, two MOSTPLUS hard folds and one BAK BAKFlip MX4 part number. None is a retractable cover. Every cover is clamp-on with no drilling, and none is listed as fitting only under a condition.
28.3 lb
Cover type: soft roll-upDistributed load rating: not publishedCover weight: 28.3 lb
Fits Tyger TG-BC1C9007 fits the 6 ft 7 in (79 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. The cover interferes with a power tailgate.
Check price on Amazon5 yr tied with 3 others
Cover type: soft roll-upDistributed load rating: not publishedCover weight: not published
Fits ACCESS lists part 22329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018.
Check price on AmazonACCESS lists part 22329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018.
ACCESS lists part 12329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018.
ACCESS lists part 42329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018. ACCESS also lists part 62329 for this bed but does not say what the variant is.
ACCESS lists part 32329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018.
ACCESS lists part 92329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018. VANISH comes in vinyl (this part number) and canvas (the same number with a -0.1 suffix).
ACCESS lists part 22020329 for the 1500 with a 6ft 6in bed in model years 2014 and 2018.
Tyger TG-BC1C9007 fits the 6 ft 7 in (79 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. The cover interferes with a power tailgate.
Tyger TG-BC3C1007 fits the 6 ft 7 in (79 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. The cover interferes with a power tailgate.
MOSTPLUS M042249-SH is a 3-fold 6.5 ft FRP hard tonneau cover for the 2014-2026 Silverado and Sierra 1500 with the 6.5 ft bed, and it is also listed for the 2015-2019 Silverado and Sierra 2500 and 3500. It will not fit with the factory side storage boxes or the CarbonPro bed, and it fits only trucks without the MultiPro or MultiFlex tailgate.
MOSTPLUS M04224902-SH is a 4-fold 6.5 ft FRP hard tonneau cover for the 2014-2026 Silverado and Sierra 1500 with the 6.5 ft bed. It will not fit with the factory side storage boxes or the CarbonPro bed, and it fits only trucks without the MultiPro or MultiFlex tailgate.
HSP Diesel lists BAK 448121 for the 6'6" bed on the 2014 1500 only and the 2015-2019 1500, 2500 and 3500. JBS lists 448121 under the 2014-2018 Silverado 1500 without a bed length, so the two retailers disagree on the bed. Confirm with the maker before ordering.
Tyger lists no T4 tonneau cover for this vehicle and bed length. That means no product is listed, not that it is known not to fit.
Start with cover type. There are seven soft roll-ups (six ACCESS and the Tyger T1), one soft tri-fold (Tyger T3), one hard tri-fold (MOSTPLUS) and two hard quad-folds (MOSTPLUS and BAK). Load ratings are published only for the hard covers: 350 lb for the MOSTPLUS folds and 400 lb for the BAK BAKFlip MX4. Cover weight comes only from Tyger. The T1 TG-BC1C9007 is listed at 28.3 lb and the T3 TG-BC3C1007 at 38.3 lb. Warranty runs from 1 year on the MOSTPLUS folds to 5 years on ACCESS Limited Edition, Original and LORADO, both Tyger lines and BAK. LITERIDER and VANISH carry 3 years and TONNOSPORT carries 2. Several factory options change the answer. MOSTPLUS says its folds will not fit with factory side storage boxes or with a CarbonPro bed, and will fit only without the MultiPro or MultiFlex tailgate. Both Tyger covers note interference with a power tailgate. Across the makers' notes, CarbonPro beds and factory side storage boxes exclude most covers, and a few makers sell a CarbonPro-specific part.
The BAK part is the one to check twice. HSP Diesel labels BAK 448121 as the 6 ft 6 in bed, for the 2014 1500 only, with 2015-2019 for the 1500, 2500 and 3500. JBS lists 448121 under 2014-2018 Silverado 1500 with no bed length, so the two retailers disagree on the bed. Our source for this part number is a search-result title and summary rather than the maker's own page, so confirm it with BAK before ordering. MOSTPLUS excludes factory side storage boxes, CarbonPro beds and trucks with the MultiPro or MultiFlex tailgate. Tyger says the T1 and T3 will interfere with a power tailgate. Confirm each of these against your truck, and the bed length against the maker's listing, before buying.
11 of the 12 tonneau covers made for the 5.67 ft bed are also made for this one, with a different part number for each bed length. 7 of the 7 tonneau covers made for the 8 ft bed are also made for this one, with a different part number for each bed length.
The bed has a floor length of 78.9 in. Makers label it 6ft 6in, 6.5 ft or 6 ft 7 in. Match the label to your bed length, because a cover fits only the bed length it is made for.
No. MOSTPLUS says both the 3-fold M042249-SH and the 4-fold M04224902-SH will not fit with factory side storage boxes, and will not fit with a CarbonPro bed either.
MOSTPLUS says its folds will fit without the MultiPro or MultiFlex tailgate, so a truck with one is outside that listing. Tyger separately notes interference with a power tailgate. Check your tailgate with the maker.
MOSTPLUS lists 350 lb for its tri-fold and four-fold, and the BAK BAKFlip MX4 lists 400 lb. ACCESS and Tyger publish no load rating for their soft covers, so ask the maker.
Retailers disagree. HSP Diesel labels it the 6 ft 6 in bed for the 2014 1500 only, while JBS lists it under 2014-2018 Silverado 1500 with no bed length. Confirm the bed with BAK.
Among the covers with a published weight, the Tyger T1 TG-BC1C9007 is listed at 28.3 lb, against 38.3 lb for the T3 TG-BC3C1007. ACCESS, MOSTPLUS and BAK publish no weight.