We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
12 tonneau covers fit and 1 do not, by the makers' own fit charts. Among the fits: 7 soft roll-up, 2 hard quad-fold, 1 soft tri-fold, 1 hard tri-fold, 1 retractable.
Tonneau covers for the 5 ft 8 in bed on a 2014-2018 Chevrolet Silverado 1500 in Regular Cab, Double Cab or Crew Cab. The bed has a floor length of 69.3 in, an inside width of 64.6 in and a wheel well width of 51 in. Makers round that length differently. ACCESS says 5ft 8in, MOSTPLUS and SYNETICUSA say 5.8 ft, Tyger says 5 ft 9 in, and BAK retailers split between 5 ft 8 in and 5 ft 9 in. Twelve covers have a maker listing for this bed, and one, the Tyger T4 four-fold, has none because Tyger's application list has no SKU for it. That means Tyger lists no product for this truck, not that the cover was found not to fit. The 12 are six ACCESS part numbers, two Tyger soft covers, two MOSTPLUS hard folds, one BAK part number and one SYNETICUSA retractable. All 12 are listed as fitting, though several makers set conditions in their own notes.
350 lb
Cover type: hard quad-foldDistributed load rating: 350 lbCover weight: not published
Fits MOSTPLUS M04224102-SH is a 4-fold 5.8 ft FRP hard tonneau cover for the 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 with the 5.8 ft Fleetside bed....
Check price on Amazon33.7 lb
Cover type: soft tri-foldDistributed load rating: not publishedCover weight: 33.7 lb
Fits Tyger TG-BC3C1006 fits the 5 ft 9 in (69 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. The cover interferes with a power tailgate.
Check price on Amazon5 yr tied with 1 other
Cover type: soft roll-upDistributed load rating: not publishedCover weight: not published
Fits ACCESS lists part 12319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018.
Check price on AmazonACCESS lists part 22319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018.
ACCESS lists part 12319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018.
ACCESS lists part 42319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018. ACCESS also lists part 62319 for this bed but does not say what the variant is.
ACCESS lists part 32319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018.
ACCESS lists part 92319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018. VANISH comes in vinyl (this part number) and canvas (the same number with a -0.1 suffix).
ACCESS lists part 22020319 for the 1500 with a 5ft 8in bed in model years 2014 and 2018.
Tyger TG-BC1C9006 fits the 5 ft 9 in (69 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. It fits trucks without the Utility Track System. The cover interferes with a power tailgate.
Tyger TG-BC3C1006 fits the 5 ft 9 in (69 in) bed on the 2014-2018 Chevy Silverado and GMC Sierra 1500. The cover interferes with a power tailgate.
MOSTPLUS M042241-SH is a 5.8 ft 3-fold FRP hard tonneau cover, on-top style, for the 2007-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 with the 5.8 ft Fleetside bed. It is not for trucks with the cargo rack system (remove it before installing) or the factory utility track. On a CarbonPro bed liner, a slot must be cut for the clamp.
MOSTPLUS M04224102-SH is a 4-fold 5.8 ft FRP hard tonneau cover for the 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 with the 5.8 ft Fleetside bed. For 2019-2026 it fits only the Silverado and Sierra 1500 Classic body.
RealTruck lists BAK-448120 for the 2014-2018 Chevy Silverado and GMC Sierra 1500 with a 5'8" bed, while Rack Attack and JBS call it 5'9". HSP Diesel adds the 2019 Legacy and Limited and the 2015-2019 1500, 2500 and 3500 (2014 is 1500 only). Confirm with the maker before ordering.
SYNETICUSA lists TC-R10A-SIL07-SH (part 2552441) for the 2007-2026 Silverado 1500 with a 5.8 ft bed. It fits only trucks without the factory rail system (deck rails), and a truck with the Carbon Pro Bed needs a separate purchase. SYNETICUSA does not mention the MultiPro tailgate or side boxes. Confirm with the maker before ordering.
Tyger lists no T4 tonneau cover for this vehicle and bed length. That means no product is listed, not that it is known not to fit.
Cover type comes first. Seven of the 12 are soft roll-ups (six ACCESS and the Tyger T1), one is a soft tri-fold (Tyger T3), one is a hard tri-fold (MOSTPLUS), two are hard quad-folds (MOSTPLUS and BAK) and one is a retractable (SYNETICUSA). Load ratings run from 350 lb on the MOSTPLUS folds to 400 lb on the BAK BAKFlip MX4 and 500 lb on the SYNETICUSA MR Retractable PRO. The soft covers publish none. Cover weight is published only for Tyger: 26.6 lb for the T1 TG-BC1C9006 and 33.7 lb for the T3 TG-BC3C1006. Warranty runs from 1 year on the MOSTPLUS folds to 5 years on ACCESS Limited Edition, Original and LORADO, both Tyger lines, BAK and SYNETICUSA. LITERIDER and VANISH carry 3 years and TONNOSPORT carries 2. Four factory options change the answer. The power tailgate matters for both Tyger covers. The factory utility track matters for the Tyger T1, which is listed for models without it, and for the MOSTPLUS 3-fold. A CarbonPro bed matters for MOSTPLUS and SYNETICUSA. Factory deck rails matter for SYNETICUSA, which is listed only for models without them.
Tyger's listings for the T1 TG-BC1C9006 and the T3 TG-BC3C1006 both say equipping the cover will interfere with power tailgate. MOSTPLUS says its 3-fold is not for a cargo rack system, which must come off first, or the factory utility track, and a CarbonPro liner needs a slot cut for the clamp. SYNETICUSA requires a separate purchase for the Carbon Pro bed and does not mention MultiPro tailgates or side boxes. The BAK part 448120 is labelled 5 ft 8 in by RealTruck and 5 ft 9 in by Rack Attack and JBS, and the BAK and SYNETICUSA details come from search-result or fetch summaries rather than the makers' full product pages. Confirm the bed length on the maker's page before buying.
11 of the 11 tonneau covers made for the 6.5 ft bed are also made for this one, with a different part number for each bed length. 7 of the 7 tonneau covers made for the 8 ft bed are also made for this one, with a different part number for each bed length.
The bed has a floor length of 69.3 in. Makers label it 5ft 8in, 5.8 ft or 5 ft 9 in, so match the label to your bed length. A cover fits only the bed length it is made for.
Tyger's listings for the T1 TG-BC1C9006 and the T3 TG-BC3C1006 both say equipping the cover will interfere with power tailgate. If your truck has one, check each other maker's page for tailgate notes before you order.
Per the makers, it takes extra steps. MOSTPLUS says a CarbonPro bed liner needs a slot cut for the clamp, and SYNETICUSA says a separate purchase is required for a truck bed with the Carbon Pro Bed.
It depends on the cover. Tyger lists the T1 TG-BC1C9006 for models without the Utility Track System, and the MOSTPLUS 3-fold says it is not for the factory utility track. Confirm against your truck before buying.
The makers list 350 lb for the MOSTPLUS folds, 400 lb for the BAK BAKFlip MX4 and 500 lb for the SYNETICUSA MR Retractable PRO. ACCESS and Tyger soft covers publish no load rating.
Retailers label it differently. RealTruck lists BAK-448120 for the 5 ft 8 in bed of the 2014-2018 Silverado and Sierra 1500, while Rack Attack and JBS call it 5 ft 9 in. Confirm the bed length on the maker's page before ordering.