We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
19 tonneau covers fit and 1 do not, by the makers' own fit charts. Among the fits: 14 soft roll-up, 2 soft tri-fold, 2 hard quad-fold, 1 hard tri-fold.
These are the tonneau covers for the standard bed on a 2007-2021 Toyota Tundra Double Cab or CrewMax. The standard bed has a floor length of 78.7 in and a wheel well width of 50 in. ACCESS calls it 6ft 6in, Tyger and MOSTPLUS say 6.5 ft, and BAK says 6 ft 7 in. Nineteen covers have a maker listing for this bed and one does not, the Tyger T4 four-fold, which is missing from Tyger's own application list. That is not a measured non-fit. The 19 break down into twelve ACCESS part numbers, four Tyger soft covers, two MOSTPLUS hard folds and one BAK BAKFlip MX4 part number. None of them is retractable. Every cover is clamp-on with no drilling, and none is listed as fitting only with a condition.
400 lb
Cover type: hard quad-foldDistributed load rating: 400 lbCover weight: not published
Fits Rack Attack lists 448410T as the 6'7" Tundra version with deck rails. No 6'7" MX4 for trucks without deck rails and no 8 ft MX4 turned up in retailer listing...
Check price on Amazon28.3 lb
Cover type: soft roll-upDistributed load rating: not publishedCover weight: 28.3 lb
Fits Tyger TG-BC1T9042 fits the 6.5 ft (79 in) bed on the 2014-2021 Toyota Tundra. It fits trucks with or without the Utility Track System. This part number cover...
Check price on Amazon5 yr tied with 8 others
Cover type: soft roll-upDistributed load rating: not publishedCover weight: not published
Fits ACCESS lists part 25219 for the Tundra 6ft 6in bed, model years 2007 and 2021.
Check price on AmazonACCESS lists part 25219 for the Tundra 6ft 6in bed, model years 2007 and 2021.
ACCESS lists part 15219 for the Tundra 6ft 6in bed, model years 2007 and 2021.
ACCESS lists part 45219 for the Tundra 6ft 6in bed, model years 2007 and 2021. ACCESS also lists part 65219 for this line, but does not say which variant it is.
ACCESS lists part 35219 for the Tundra 6ft 6in bed, model years 2007 and 2021.
ACCESS lists part 95219 for the Tundra 6ft 6in bed, model years 2007 and 2021. VANISH comes in vinyl under this part number and in canvas with a -0.1 suffix added.
ACCESS lists part 22050219 for the Tundra 6ft 6in bed, model years 2007 and 2021.
ACCESS lists part 25249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021.
ACCESS lists part 15249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021.
ACCESS lists part 45249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021. ACCESS also lists part 65249 for this line, but does not say which variant it is.
ACCESS lists part 35249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021.
ACCESS lists part 95249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021. VANISH comes in vinyl under this part number and in canvas with a -0.1 suffix added.
ACCESS lists part 22050249 for the Tundra 6ft 6in bed with deck rail, model years 2007 and 2021.
Tyger TG-BC1T9042 fits the 6.5 ft (79 in) bed on the 2014-2021 Toyota Tundra. It fits trucks with or without the Utility Track System. This part number covers model years 2014-2021 of the 2007-2021 generation only, and Tyger sells a separate part number for the other years.
Tyger TG-BC1T9039 fits the 6.5 ft (79 in) bed on the 2007-2013 Toyota Tundra. It fits trucks with or without the Utility Track System. This part number covers model years 2007-2013 of the 2007-2021 generation only, and Tyger sells a separate part number for the other years.
Tyger TG-BC3T1433 fits the 6.5 ft (79 in) bed on the 2014-2021 Toyota Tundra. It fits trucks with or without the Utility Track System. It is not compatible with the Trail Special Edition with storage boxes. This part number covers model years 2014-2021 of the 2007-2021 generation only, and Tyger sells a separate part number for the other years.
Tyger TG-BC3T1033 fits the 6.5 ft (79 in) bed on the 2007-2013 Toyota Tundra. It fits trucks with or without the Utility Track System. This part number covers model years 2007-2013 of the 2007-2021 generation only, and Tyger sells a separate part number for the other years.
MOSTPLUS M042445-SH is a 3-fold 6.5 ft FRP hard tonneau cover for the 2007-2026 Toyota Tundra with the 6.5 ft bed, with or without the factory deck rail system. It fits Fleetside/Styleside models only and does not fit the Trail Special Edition with storage boxes.
MOSTPLUS M04244502-SH is a 4-fold 6.5 ft FRP hard tonneau cover, on-top style, for the 2007-2026 Toyota Tundra with the 6.5 ft bed, with or without the factory deck rail system. It fits Fleetside/Styleside models only and does not fit the Trail Special Edition with storage boxes.
Rack Attack lists 448410T as the 6'7" Tundra version with deck rails. No 6'7" MX4 for trucks without deck rails and no 8 ft MX4 turned up in retailer listings. Confirm with the maker before ordering.
Tyger lists no T4 tonneau cover for this vehicle and bed length. That means no product is listed, not that it is known not to fit.
Start with cover type. Fourteen are soft roll-ups (twelve ACCESS and two Tyger T1), two are soft tri-folds (Tyger T3), one is a hard tri-fold (MOSTPLUS) and two are hard quad-folds (one MOSTPLUS, one BAK). Published load ratings come only from the hard covers. MOSTPLUS lists 350 lb distributed load and the BAK BAKFlip MX4 lists 400 lb. The soft covers show no rating. Cover weight is published only for the four Tyger covers. The lowest is the T1 TG-BC1T9042 at 28.3 lb. The highest is the T3 TG-BC3T1433 at 37.7 lb. Warranty runs from 1 year on the MOSTPLUS folds to 5 years on ACCESS Limited Edition, Original and LORADO, both Tyger lines and BAK. LITERIDER and VANISH carry 3 years and TONNOSPORT carries 2. The factory deck rail system, which uses four adjustable tie-down cleats, changes the part number. ACCESS lists one set of parts for beds without it (ending 219) and another set with it (ending 249). The only BAK part number located is 448410T, listed for beds with deck rails. MOSTPLUS lists its covers for beds with or without the rail system, and Tyger says its covers fit with or without the Utility Track System.
Check your model year against the Tyger part. TG-BC1T9042 and TG-BC3T1433 are for 2014-2021, while TG-BC1T9039 and TG-BC3T1033 are for 2007-2013. Tyger lists the 2014-2021 T3 as not compatible with the Trail Special Edition with storage boxes, and MOSTPLUS says its folds do not fit that edition either. MOSTPLUS also lists fit for Fleetside and Styleside models only. For BAK, only the deck rail part, 448410T, is known, and that comes from a search summary rather than BAK's own page. No 6 ft 7 in version without deck rails turned up in the results read. That does not say none exists, so confirm with BAK before ordering for a bed without rails.
20 of the 21 tonneau covers made for the short are also made for this one, with a different part number for each bed length. 12 of the 12 tonneau covers made for the long are also made for this one, with a different part number for each bed length.
The standard bed has a floor length of 78.7 in. Makers label it 6ft 6in, 6.5 ft or 6 ft 7 in, so match the label to your bed first. Then pick the part number for your model year and deck rail setup.
ACCESS lists a separate part for each line with the deck rail, such as 25249 for the Limited Edition and 15249 for the Original. BAK lists 448410T for deck rails. MOSTPLUS lists its covers for beds with or without the rail system.
Not with storage boxes, according to the makers. MOSTPLUS says its folds do not fit the Trail Special Edition with storage boxes, and Tyger says the same for the 2014-2021 T3 tri-fold. Check the maker's page for your exact truck.
Tyger's application list, read 2026-10-24, shows no T4 Flip-Up Low Profile Hard Alloy Four-Fold SKU for this bed. That means no product is listed, not that it was measured not to fit. Ask Tyger before ruling it out.
Only the hard covers publish a figure. MOSTPLUS lists 350 lb distributed load and the BAK BAKFlip MX4 lists 400 lb. The ACCESS and Tyger soft covers show no load rating, so ask the maker.
Yes. TG-BC1T9042 is the maker's part for 2014-2021 and TG-BC1T9039 is for 2007-2013. Tyger sells a separate SKU for each span, and the listed cover weights are 28.3 lb and 28.4 lb.