We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
17 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1.75 to 6 inches.
The 2007-2021 Toyota Tundra has 17 lift and leveling kits, and all 17 fit. None fits with a condition or is ruled out by its maker, though the makers' notes carry trim exclusions covered below. The truck comes in Double Cab and CrewMax with three bed floor lengths: 66.7 in on the Short Bed, 78.7 in on the Standard Bed and 97.6 in on the Long Bed. Factory bed gear is a deck rail system with four adjustable tie-down cleats and an easy lower and lift tailgate, and the tow-package receiver opening size is not published. The kits come from three makers: seven from Rough Country, nine from Zone Offroad Products and one from Fabtech. Ten are 4WD only, one is 2WD only and six cover both. Front lift runs from 1.75 in to 6 in, so the right kit depends on your drivetrain, your trim and the model years you need.
6 in
Kit type: full suspension liftFront lift: 6 inRear lift: not published
Fits Rough Country 754 (75430, with 75431 N3, 75440 M1 and 75457 Vertex struts) fits 2WD and 4WD trucks but only 2007-2015. It has lifted knuckles, crossmembers, ...
Check price on Amazon35 in tied with 2 others
Kit type: full suspension liftFront lift: 5 inRear lift: 3 in
Fits Zone's 5 inch lift kit fits 4WD Tundra models from 2016 to 2021. It uses strut spacers and the FOX Adventure Series.
Check price on Amazon1.75 in
Kit type: leveling kitFront lift: 1.75 inRear lift: 0 in
Fits Rough Country 88000 is a set of upper strut extensions for 2WD and 4WD trucks, listed for 2007-2021. It does not fit Pro Series or XSP-X models. Install take...
Check price on AmazonRough Country 88000 is a set of upper strut extensions for 2WD and 4WD trucks, listed for 2007-2021. It does not fit Pro Series or XSP-X models. Install takes 2-3 hours.
Rough Country 870 fits 2WD and 4WD trucks, is listed for 2007-2021, and includes upper strut extensions, differential mounting spacers, skid plate spacers and bump stops. Rough Country sells it as a 2.5-3 inch kit, and 4WD kit 87000 adds 1.5 in rear lift blocks. It does not fit Pro Series or XSP-X models, TRD models may not need the strut spacer shims, and install takes 2-3 hours.
Rough Country 87000 is for 4WD only and is listed for 2007-2021. It has upper strut extensions, differential mounting spacers, skid plate spacers, bump stops and 1.5 in rear lift blocks with U-bolts. It does not fit Pro Series or XSP-X models, and install takes 3-4 hours.
Rough Country 871 is for 2WD only, is listed for 2007-2021, and includes 2WD upper strut extensions. Optional lifted struts are non-adjustable and give 3 inches of front lift. It does not fit TRD Pro Series or XSP-X models, and install takes 2-3 hours.
Rough Country 76830 (76831 with N3 struts, 76840 with M1 struts, 76857 with Vertex/V2) fits 2WD and 4WD trucks and is listed for 2007-2021. It has upper control arms, strut spacers, preload spacers, differential spacers, bump stop spacers, rear lift blocks and two rear Premium N3 shocks, and the N3 loaded struts are for 4WD only. It does not fit TRD Pro, Rock Warrior or XSP-X, TRD models with a red rear sway bar must remove it, and install takes 4-6 hours.
Rough Country 75330 (75331 with N3 struts) fits 2WD and 4WD trucks but only 2007-2015, which is the early part of the 2007-2021 generation. It has lifted knuckles, crossmembers, steering stops, differential drop brackets, fabricated rear lift blocks and two rear Premium N3 shocks, and it needs 18 in or larger wheels. Rough Country says stock 18 in or larger wheels take tires no wider than 11.5 in and 35 in tires may need minor trimming, two-piece driveshaft trucks may vibrate on take-off (part 177 corrects it), and it does not fit Pro Series, Rock Warrior or XSP-X. It also needs minor cutting and drilling, and install takes 8-10 hours.
Rough Country 754 (75430, with 75431 N3, 75440 M1 and 75457 Vertex struts) fits 2WD and 4WD trucks but only 2007-2015. It has lifted knuckles, crossmembers, fabricated rear lift blocks and two rear Premium N3 shocks, and the lifted strut replacements do not fit 2WD. It needs 18 in or larger wheels, stock wheels take tires no wider than 11.5 in, 35 in tires may need minor trimming, two-piece driveshaft trucks may vibrate on take-off, and it does not fit TRD Pro, Rock Warrior or XSP-X. It also needs minor cutting and drilling, and install takes 8-10 hours.
Fabtech FTL5605 fits 2WD and 4WD trucks and is listed for 2007-2021. Some models may not sit level after install, it will not fit TRD Pro models, and each tire pairing Fabtech lists needs minor trimming with 5.5 in backspacing.
Zone's 2 inch leveling kit comes with loaded struts and fits Tundra models from 2007 to 2021. It is for 4WD only.
This 3 inch strut spacer leveling kit fits Tundra models from 2007 to 2021, according to Zone. It is for 4WD only.
Zone lists this 3 inch lift kit for Tundra models from 2007 to 2021. It is for 4WD only.
Zone's 3.5 inch lift kit fits 4WD Tundra models from 2007 to 2021. It uses strut spacers and the FOX Adventure Series.
For 4WD Tundra models from 2007 to 2021, Zone lists this 3.5 inch lift kit. It uses loaded struts and the Nitro Series.
Zone's 3.5 inch lift kit fits 4WD Tundra models from 2007 to 2021. It uses strut spacers and the Nitro Series.
Zone's 5 inch lift kit fits 4WD Tundra models from 2016 to 2021. It uses strut spacers and the FOX Adventure Series.
For 4WD Tundra models from 2016 to 2021, Zone lists this 5 inch lift kit. It uses loaded struts and the Nitro Series.
Zone's 5 inch lift kit fits 4WD Tundra models from 2016 to 2021. It uses strut spacers and the Nitro Series.
Seven kits are leveling kits, one is a spacer lift and nine are full suspension lifts. At the small end, Rough Country 88000 holds the lowest figure at 1.75 in of front lift, with upper strut extensions and a 2-3 hour install. Fabtech FTL5605 and Zone ZONT23LN are 2 in leveling kits. Zone ZONT1300 and ZONT1310 reach 3 in, and ZONT1310 adds 2 in at the rear. Rough Country 870, 87000 and 871 sit at 2.5 in, and 87000 adds 1.5 in rear lift blocks for 4WD. The 3.5 in group is Rough Country 76830 plus Zone ZONT6F, ZONT6LN and ZONT6N, and the three Zone kits list 1 in at the rear. The 5 in group is Zone ZONT5F, ZONT5LN and ZONT5N at 3 in rear, and they carry the largest tire any maker lists for this truck, 35 in. The highest front figure is 6 in on Rough Country 754, with 4.5 in on Rough Country 75330 just below it, and both are 2007-2015 only. Factory options change the answer. All seven Rough Country kits exclude XSP-X and a Pro Series or TRD Pro version, and 76830 asks TRD models with a red rear sway bar to remove it. Rough Country 871 is the only 2WD-only kit.
No kit is ruled out by its maker, so the limits sit in the conditions. All seven Rough Country kits exclude XSP-X and a Pro Series or TRD Pro truck. Fabtech FTL5605 will not fit TRD Pro, notes that some models may not sit level, and says each tire pairing needs minor trimming with 5.5 in backspacing. Rough Country 75330 and 754 are 2007-2015 only and want wheels of 18 in or larger, and trucks with a two-piece driveshaft may have take-off vibration that SKU 177 corrects. The Zone 5 in kits are 2016-2021 only, and every Zone kit is 4WD only. Before buying, check your model year, 2WD or 4WD, and the exact part number, since Rough Country sells strut and shock variants under one base number, such as 76831 and 76840 for the 76830.
3 of the 25 lift and leveling kits made for the 2022-2026 Toyota Tundra are also made for this truck.
Rough Country 754 lists 6 in of front lift, the highest for this truck, but the maker lists it for 2007-2015 only. For 2016-2021 4WD trucks the highest is the Zone 5 in group, ZONT5F, ZONT5LN and ZONT5N, at 5 in front and 3 in rear.
Several kits fit 2WD. Rough Country 871 is 2WD only at 2.5 in. Rough Country 88000 and 870 and Fabtech FTL5605 fit 2WD and 4WD, at 1.75 in, 2.5 in and 2 in. The Zone kits are all 4WD only.
Not the kits that say so. Rough Country 88000, 870, 87000, 871, 76830, 75330 and 754 all exclude Pro Series or TRD Pro, and Fabtech FTL5605 will not fit TRD Pro. Zone gives no trim note, so confirm with Zone.
The maker lists 33 in on Zone ZONT23LN, ZONT1300 and ZONT1310, and 35 in on the three Zone 5 in kits. Rough Country 75330 and 754 say minor trimming may be needed to clear 35 in tires. The other kits do not publish a largest tire.
Ten kits include shocks: Rough Country 76830, 75330 and 754, plus Zone ZONT23LN, ZONT6F, ZONT6LN, ZONT6N, ZONT5F, ZONT5LN and ZONT5N. The other seven kits reuse the factory shocks.
Rough Country lists 2-3 hours for 88000, 870 and 871, 3-4 hours for 87000, 4-6 hours for 76830, and 8-10 hours for 75330 and 754. Fabtech and Zone do not publish an install time.