We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
14 tonneau covers fit and 9 do not, by the makers' own fit charts. Among the fits: 10 soft roll-up, 3 hard quad-fold, 1 soft tri-fold.
Silverado 1500 and Sierra 1500 owners with the short bed have 22 listings to sort through, 13 that fit and 9 that are ruled out. A part number appears more than once when the maker attaches a condition, so the Tyger T1 shows up as one fit and two exclusions. These covers are listed for the 2019-2026 Chevrolet Silverado 1500 and the 2019-2026 GMC Sierra 1500, which share a platform. The short bed has a 69.92 in floor, a 71.4 in inside width and 50.63 in between the wheel wells. The standard bed is 79.44 in and the long bed is 98.18 in. Cabs are Regular, Double and Crew. The tailgates and bed systems are where fit gets decided: Multi-Flex, EZ Lift and a power up/down tailgate on the Chevrolet, MultiPro on the GMC, and Durabed, spray-in liners and CarbonPro beds.
400 lb
Cover type: hard quad-foldDistributed load rating: 400 lbCover weight: not published
Fits BAK-448135 is for the GMC Sierra 1500 5ft 8in bed only and needs drilling to install, while BAK-448130 covers both Silverado and Sierra in 5ft 8in. Two part ...
Check price on Amazon26.6 lb
Cover type: soft roll-upDistributed load rating: not publishedCover weight: 26.6 lb
Fits Tyger TG-BC1C9053 fits the 5 ft 10 in (70 in) bed on 2019-2026 Chevy Silverado 1500 and GMC Sierra 1500, and on the 2022 Silverado 1500 LTD and Sierra 1500 L...
Check price on Amazon5 yr
Cover type: hard quad-foldDistributed load rating: not publishedCover weight: 74.74 lb
Fits Tyger TG-BC4C4411 fits the 2019 to 2026 Chevy Silverado 1500 and GMC Sierra 1500 with a 5 foot 10 inch (70-inch) bed, and the 2022 Silverado 1500 LTD and Sie...
Check price on AmazonTyger TG-BC1C9053 fits the 5 ft 10 in (70 in) bed on 2019-2026 Chevy Silverado 1500 and GMC Sierra 1500, and on the 2022 Silverado 1500 LTD and Sierra 1500 Limited. Tyger says it does not fit the 2019 Silverado 1500 LD or Sierra 1500 Limited, or trucks with the CarbonPro bed or the factory side storage box, and it interferes with the power tailgate.
Tyger TG-BC3C1053 fits the 5 ft 10 in (70 in) bed on 2019-2026 Chevy Silverado 1500 and GMC Sierra 1500, and on the 2022 Silverado 1500 LTD and Sierra 1500 Limited. Tyger says it does not fit the 2019 Silverado 1500 LD or Sierra 1500 Limited, or trucks with the CarbonPro bed or the factory side storage box, and it interferes with the power tailgate.
Tyger TG-BC4C4411 fits the 2019 to 2026 Chevy Silverado 1500 and GMC Sierra 1500 with a 5 foot 10 inch (70-inch) bed, and the 2022 Silverado 1500 LTD and Sierra 1500 Limited. It does not fit the 2019 Silverado 1500 LD or Sierra 1500 Limited, or models with the CarbonPro bed and factory side storage box.
ACCESS lists part 12369 for the Chevy/GMC 1500 5ft 8in bed without the Multi Tailgate, for model years 2019 and 2026.
ACCESS lists the same part 12369 for the 5ft 8in bed with the Multi Tailgate as without it. ACCESS says only Multi Tailgate, so we read that as covering Multi-Pro and Multi-Flex.
ACCESS lists part 12459 for the Chevy/GMC 1500 with CarbonPro box, 5ft 8in bed, for model years 2019 and 2026. CarbonPro beds have their own part number, and the standard-bed part is not listed for them. ACCESS lists only the 5ft 8in bed for CarbonPro trucks.
ACCESS lists the same part 12459 for the CarbonPro 5ft 8in bed with or without the Multi Tailgate.
ACCESS lists part 32369 for the Chevy/GMC 1500 5ft 8in bed without the Multi Tailgate, for model years 2019 and 2026.
ACCESS lists the same part 32369 for the 5ft 8in bed with the Multi Tailgate as without it. ACCESS says only Multi Tailgate, so we read that as covering Multi-Pro and Multi-Flex.
ACCESS lists part 32459 for the Chevy/GMC 1500 with CarbonPro box, 5ft 8in bed, for model years 2019 and 2026. CarbonPro beds have their own part number, and the standard-bed part is not listed for them. ACCESS lists only the 5ft 8in bed for CarbonPro trucks.
ACCESS lists the same part 32459 for the CarbonPro 5ft 8in bed with or without the Multi Tailgate.
RealTruck lists BAK-448130 for 2019-2026 Chevy Silverado and GMC Sierra 1500 with the 5ft 8in bed. It does not work with factory bed storage boxes. Confirm with the maker before ordering.
GMC Sierra 1500 only. ACCESS lists the same part, 32459, for the CarbonPro on a 5ft 8in bed with or without the Multi Tailgate.
GMC Sierra 1500 only. BAK-448135 is for the GMC Sierra 1500 5ft 8in bed only and needs drilling to install, while BAK-448130 covers both Silverado and Sierra in 5ft 8in. Two part numbers cover the same truck and bed, and which one fits depends on your bed system. Confirm with the maker before ordering.
Tyger TG-BC1C9053 does not fit trucks with the CarbonPro bed or the factory side storage box.
Tyger says the TG-BC1C9053 cover interferes with the power tailgate.
Tyger TG-BC3C1053 does not fit trucks with the CarbonPro bed or the factory side storage box.
Tyger says the TG-BC3C1053 cover interferes with the power tailgate.
Tyger TG-BC4C4411: not compatible with CarbonPro bed or factory side storage box.
MOSTPLUS lists the 2007-2026 Silverado and Sierra 1500 with a 5.8 ft bed, but limits the 2019 listing to the Classic model only. Its 4-fold cover says 2019-2026 means the Classic body and is not for the new body. Expect it not to fit the 2019 and newer new-body truck until that is checked.
For 2019-2026, MOSTPLUS lists this 5.8 ft 4-fold cover for the Classic body with the 5.8 ft Fleetside bed, not for the new body.
RealTruck says BAK-448130 does not work with factory bed storage boxes.
GMC Sierra 1500 only. MOSTPLUS lists no cover for this truck and bed length. That means no product is listed, not that a cover was found not to fit.
Of the 13 listings that fit, nine are soft roll-ups, one is a soft tri-fold and three are hard quad-folds. The soft roll-ups are the Tyger T1 (TG-BC1C9053), ACCESS Original 12369 and 12459, and ACCESS LITERIDER 32369 and 32459. The soft tri-fold is the Tyger T3 (TG-BC3C1053). The hard quad-folds are the Tyger T4 (TG-BC4C4411) and BAKFlip MX4 BAK-448130 and BAK-448135. The only load rating among the covers that fit is 400 lb, on the two BAK SKUs. The MOSTPLUS covers carry 350 lb but are not listed as fitting this bed. Listed weights are 26.6 lb (T1), 33.5 lb (T3) and 74.74 lb (T4). Warranty is 5 years on Tyger, ACCESS Original and BAK, and 3 years on LITERIDER. Three factory options change the answer. A CarbonPro bed rules out the Tyger covers, and ACCESS sells separate CarbonPro parts, 12459 and 32459. A factory side storage box also rules out the Tyger covers and BAK-448130. A power tailgate rules out the Tyger T1 and T3, which the maker says would interfere. ACCESS lists the same part with and without a Multi Tailgate.
Nine listings are ruled out, each for a stated reason. Tyger T1, T3 and T4 are not compatible with a CarbonPro bed or a factory side storage box, and the T1 and T3 add that the cover would interfere with the power tailgate. Tyger also lists the 2019 Silverado 1500 LD and Sierra 1500 Limited as not compatible. BAK-448130 will not work with factory bed storage boxes. MOSTPLUS lists a 2019 Classic model only and says Not For New Body, so both MOSTPLUS covers are ruled out for now, and no MOSTPLUS SKU is listed for the Sierra. BAK-448135 is Sierra only and requires drilling, and which bed system it suits is not settled. The ACCESS finder says Multi Tailgate; covered here that as Multi-Pro or Multi-Flex, so confirm it with ACCESS. Match part number, bed and tailgate before buying.
The 2019-2026 GMC Sierra 1500 shares the 2019-2026 Chevrolet Silverado 1500's platform and bed, so the makers list them together. Where a maker treats the twins differently, the note beside the product says which truck it means.
8 of the 10 tonneau covers made for the standard are also made for this one, with a different part number for each bed length. 3 of the 3 tonneau covers made for the long are also made for this one, with a different part number for each bed length.
Thirteen listings fit: Tyger T1, T3 and T4, ACCESS Original and LITERIDER in standard and CarbonPro part numbers, and BAK-448130 and BAK-448135. Several carry conditions for CarbonPro beds, side storage boxes or power tailgates.
Tyger lists CarbonPro beds as not compatible. ACCESS lists separate parts for them: 12459 for the Original and 32459 for the LITERIDER, each for the 5 ft 8 in bed.
Tyger says the T1 and T3 would interfere with the power tailgate. ACCESS lists the same part, 12369 or 32369, with and without its Multi Tailgate label, and reading that label as Multi-Pro or Multi-Flex is our interpretation.
No for the two hard covers that address it. Tyger T4 is not compatible with a factory side storage box, and the RealTruck listing for BAK-448130 says it will not work with factory bed storage boxes.
Mostly. They share a platform and the same listings. BAK-448135 is the exception, listed for the Sierra 1500 only, and no MOSTPLUS 3-fold SKU is listed for the Sierra.
The short bed has a 69.92 in floor length, 71.4 in inside width and 50.63 in between the wheel wells. Tyger writes it as 5 ft 10 in (70 in), ACCESS as 5 ft 8 in.