We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
19 lift and leveling kits fit, 1 fit with a condition, by the makers' own fit charts. Front lift ranges from 2 to 6 inches.
Lift and leveling kits for the 2016-2023 Toyota Tacoma in Access Cab and Double Cab come to 20 part numbers: 19 fit, one fits with a condition and none is ruled out by the maker. The two bed floor lengths are 60.5 in and 73.7 in. Factory bed hardware is a composite bed with a deck rail system and four adjustable tie-down cleats, plus an easy-lower lockable removable tailgate. A Class-IV receiver is stated, and the opening size is not published. Fabtech makes seven of the kits, Zone Offroad Products eight and Supreme Suspensions five. Ten are 4WD only and ten cover both 2WD and 4WD. Front lift runs from 2 in to 6 in. Most Fabtech and Supreme conditions depend on the lug count and on the TRD trim, so check those two details first.
6 in tied with 4 others
Kit type: full suspension liftFront lift: 6 inRear lift: not published
Fits Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2016 to 2023 models. You need 17-inch or larger wheels, and it does not fit Baja Series or...
Check price on Amazon35 in tied with 1 other
Kit type: full suspension liftFront lift: 6 inRear lift: 4 in
Fits Zone's 6-inch lift kit is for 4WD Tacomas only. Zone says it covers 2016 to 2023 models. It uses strut spacers and comes with FOX Adventure Series shocks.
Check price on Amazon2.5 in tied with 1 other
Kit type: leveling kitFront lift: 2.5 inRear lift: 0 in
Fits Zone's 2.5-inch strut spacer leveling kit is for 4WD Tacomas only. Zone says it covers 2005 to 2023 models.
Check price on AmazonFits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2016 to 2023 models. You need 17-inch or larger wheels, and it does not fit Baja Series or TRD Pro models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2016 to 2023 models. You need 17-inch or larger wheels, and it does not fit Baja Series models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2016 to 2023 models. You need 17-inch or larger wheels, and it does not fit Baja Series models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2015 to 2023 models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2015 to 2023 models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2015 to 2023 models.
Fits 2WD and 4WD Tacomas with 6-lug wheels. Fabtech says it covers 2015 to 2023 models.
Zone's 2.5-inch strut spacer leveling kit is for 4WD Tacomas only. Zone says it covers 2005 to 2023 models.
Zone's 6-inch lift kit is for 4WD Tacomas only. Zone says it covers 2016 to 2023 models. It uses strut spacers and comes with FOX Adventure Series shocks.
Zone's 6-inch lift kit is for 4WD Tacomas only. Zone says it covers 2016 to 2023 models. It uses strut spacers and comes with Nitro Series shocks.
Zone's 4-inch lift kit is for 4WD Tacomas only. Zone says it covers 2016 to 2023 models. It uses strut spacers and comes with FOX Adventure Series shocks.
Zone's 4-inch lift kit is for 4WD Tacomas only. Zone says it covers 2016 to 2023 models. It uses strut spacers and comes with Nitro Series shocks.
Zone's 2.5-inch lift kit is for 4WD Tacomas only. Zone says it covers 2005 to 2023 models. This version does not include shocks.
Zone's 2.5-inch lift kit is for 4WD Tacomas only. Zone says it covers 2005 to 2023 models. This version comes with FOX Adventure Series shocks.
Zone's 2.5-inch lift kit is for 4WD Tacomas only. Zone says it covers 2005 to 2023 models. This version comes with Nitro Series shocks.
Fits 2WD and 4WD Tacoma trucks, and Supreme Suspensions lists it for 2005 to 2023, but not for 5-lug models. The 3 in spacers do not fit the 2017 TRD Off-Road or the 2018 to 2020 TRD Pro. On 2016 and newer TRD models, the 3 in spacer needs upgraded control arms, while spacers up to 2.5 in work without them.
Fits 2WD and 4WD Tacoma trucks, and Supreme Suspensions lists it for 2005 to 2023, but not for 5-lug models. The 3 in spacers do not fit the 2017 TRD Off-Road or the 2018 to 2020 TRD Pro. On 2016 and newer TRD models, the 3 in spacer needs upgraded control arms, while spacers up to 2.5 in work without them.
Fits 6-lug 4WD Tacoma trucks, and Supreme Suspensions lists it for 2016. It excludes the TRD Pro.
Fits 6-lug 4WD Tacoma trucks, and Supreme Suspensions lists it for 2019. It excludes the TRD Pro.
Fits 2WD and 4WD Tacoma trucks, and Supreme Suspensions lists it for 2005 to 2023, but not for 5-lug models. The 3 in spacers do not fit the 2017 TRD Off-Road or the 2018 to 2020 TRD Pro. On 2016 and newer TRD models, the 3 in spacer needs upgraded control arms, while spacers up to 2.5 in work without them.
The 20 kits break down into seven full suspension lifts, six spacer lifts, four coilover lifts and three leveling kits. The low end starts with Supreme 3.1(blk)(pro) at 2 in, and five kits give 2.5 in, including Zone ZONT1251, ZONT12, ZONT12F, ZONT12N and Supreme 3.2(blk)(pro). Seven kits give 3 in: the four Fabtech coilover kits K7057DL, K7058DL, K7062DL and K7063DL, Supreme 3.3(blk)(pro), and Supreme SUS-LVL.31-TACOMA-0523-PRO and SUS-FSS.3DD-TAC-1921-PRO. Zone ZONT8F and ZONT8N give 4 in front and 3 in rear with a 33 in largest tire. The top of the range is 6 in on five kits: Fabtech K7047, K7048DL and K7049DL, and Zone ZONT7F and ZONT7N. The Zone pair is 4WD only, lists 4 in at the rear and a 35 in largest tire. The Fabtech 6 in kits fit 2WD and 4WD, ask for wheels of 17 in or larger, and the maker does not publish a tire size. Thirteen kits include shocks and seven reuse the factory shocks. The factory options that decide which kit fits are 6 lug versus 5 lug, TRD Off-Road, TRD Pro and Baja Series.
One kit fits with a condition: Supreme 3.3(blk)(pro). The maker says its 3 in spacer on 2016+ TRD models requires upgraded control arms, while up to 2.5 in works without. The same Supreme note says 3 in spacers do not fit the 2017 TRD Off-Road or the 2018-2020 TRD Pro, and that the 3.1, 3.2 and 3.3 kits will not fit 5-lug models. Fabtech K7047 will not fit TRD PRO models, and all three 6 in Fabtech kits do not fit Baja Series. Supreme SUS-LVL.31-TACOMA-0523-PRO and SUS-FSS.3DD-TAC-1921-PRO are 6-lug only and exclude TRD Pro, and the years in their maker titles are narrow, 2016 and 2019. Check lug count, trim, wheel size and the exact part number against the listing.
4 of the 17 lift and leveling kits made for the 2024-2026 Toyota Tacoma are also made for this truck.
Not the kits that say so. Fabtech K7047 will not fit TRD PRO models, and Supreme SUS-LVL.31-TACOMA-0523-PRO and SUS-FSS.3DD-TAC-1921-PRO exclude TRD Pro. Supreme also says its 3 in spacers do not fit the 2018-2020 TRD Pro.
On Supreme 3.3(blk)(pro), the maker says a 3 in spacer on 2016+ TRD models requires upgraded control arms, and up to 2.5 in works without them. It is the one kit that fits with a condition.
Six inches of front lift, from five kits. Zone ZONT7F and ZONT7N are 4WD only, list 4 in at the rear and a 35 in largest tire. Fabtech K7047, K7048DL and K7049DL fit 2WD and 4WD and need wheels of 17 in or larger.
Not according to the makers that say. Fabtech headers read 6 lug, Supreme says its 3.1, 3.2 and 3.3 kits will not fit 5-lug models, and two other Supreme kits are 6-lug only. Zone does not state a lug count.
Ten kits fit 2WD and 4WD: the seven Fabtech kits, which are three 6 in and four 3 in coilover, plus Supreme 3.1, 3.2 and 3.3. All eight Zone kits and the other two Supreme kits are 4WD only.
Thirteen kits include shocks: all seven Fabtech kits and six Zone kits, ZONT7F, ZONT7N, ZONT8F, ZONT8N, ZONT12F and ZONT12N. The other seven kits reuse the factory shocks.