We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
3 receiver hitches fit, by the makers' own fit charts. Gross trailer weight ratings run from 5,000 to 7,000 lb; the truck's own tow rating is the limit.
Three receiver hitches fit the 2016-2023 Toyota Tacoma in Access Cab and Double Cab form, and the makers rule none of them out. Toyota offers two bed floor lengths, 60.5 in and 73.7 in. The truck has an easy-lower lockable removable tailgate, a deck rail system with four adjustable tie-down cleats and a composite bed, so whatever you bolt under the rear bumper has to live alongside those. Toyota states a Class-IV receiver for the truck but does not publish the opening size, so the sizes shown here come from each hitch maker's own listing. Every hitch here has a 2 in receiver. Two are Class III and one is Class IV. Each entry carries a part number, a gross trailer weight rating and a tongue weight rating taken from the maker, which lets you match the number on the box to the number here before you order.
7,000 lb
Hitch class: IVReceiver opening: 2Gross trailer weight rating: 7,000 lb
Fits Draw-Tite lists this hitch for 2016-2023 Tacoma, with a 20-minute install and no drilling. Draw-Tite lists no exclusions.
Check price on Amazon900 lb
Hitch class: IIIReceiver opening: 2Gross trailer weight rating: 6,000 lb
Fits CURT lists this hitch for 2016-2023 Tacoma trucks without a factory receiver. The matching CURT wiring is 56349 (CWH, 4-flat) for 2016-2023 production years.
Check price on Amazon50.75 lb
Hitch class: IIIReceiver opening: 2Gross trailer weight rating: 5,000 lb
Fits Reese Towpower says this multi-fit hitch fits the 2016-2023 Toyota Tacoma. It installs in 60 minutes, needs drilling and has no exclusions. The same part als...
Check price on AmazonCURT lists this hitch for 2016-2023 Tacoma trucks without a factory receiver. The matching CURT wiring is 56349 (CWH, 4-flat) for 2016-2023 production years.
Draw-Tite lists this hitch for 2016-2023 Tacoma, with a 20-minute install and no drilling. Draw-Tite lists no exclusions.
Reese Towpower says this multi-fit hitch fits the 2016-2023 Toyota Tacoma. It installs in 60 minutes, needs drilling and has no exclusions. The same part also lists the Ranger, Colorado/Canyon 2015-2022 and Frontier, and its weight-distribution rating equals the 5,000 lb GTW.
All three hitches are the same product type, a custom-fit receiver hitch with a 2 in opening, so the choice comes down to class, ratings and install. Two are Class III and one is Class IV. The lowest gross trailer weight rating is 5000 lb, on the Reese Towpower Class 3 Multi-Fit, part 37137. The highest is 7000 lb, on the Draw-Tite Class 4, part 75238. Tongue weight ratings run from 500 lb on the Reese to 1050 lb on the Draw-Tite. The CURT Class 3, part 13264, sits between them at 6000 lb and 900 lb. Draw-Tite lists its install at 20 minutes with no drilling. Reese lists 60 minutes with drilling required, and that same part number also lists the Ranger, Colorado/Canyon 2015-2022 and Frontier, so it is a multi-fit design rather than one cut for the Tacoma alone. Reese gives a weight-distribution rating equal to its 5000 lb gross rating. CURT lists the 2016-2023 Tacoma excluding trucks with a factory receiver, so a factory receiver is the one option that changes the answer for the CURT part. Match the load rating to your trailer first, then look at the install.
None of these hitches is ruled out by its maker, but the fine print still carries items to check. CURT 13264 excludes a factory receiver, so look under your rear bumper before ordering. Reese 37137 lists drilling required, while Draw-Tite 75238 and CURT 13264 list no drilling. Toyota states a Class-IV receiver and does not publish the opening size, so rely on the 2 in opening in each hitch listing. Before buying, match the part number exactly, confirm your bed floor length against the two Toyota offers, 60.5 in or 73.7 in, and confirm your cab is an Access Cab or Double Cab. CURT's guide lists wiring 56349, a 4-flat connector, for production years 2016-2023.
Factory towing note from the automaker: Class-IV receiver stated; opening size not published
1 of the 1 receiver hitches made for the 2024-2026 Toyota Tacoma are also made for this truck.
Three receiver hitches fit: CURT 13264, Draw-Tite 75238 and Reese Towpower 37137. All three have a 2 in receiver. Draw-Tite lists the 2016-2023 Tacoma with no exclusions.
The highest gross trailer weight rating listed is 7000 lb, with a 1050 lb tongue weight, on the Draw-Tite Class 4, part 75238. The lowest is 5000 lb with a 500 lb tongue weight, on Reese Towpower 37137.
CURT 13264 and Draw-Tite 75238 need no drilling, according to the makers. Reese Towpower 37137 lists drilling required and 60 minutes. Draw-Tite lists its install at 20 minutes.
CURT lists the 2016-2023 Tacoma for part 13264 excluding a factory receiver. If your truck has the factory receiver, check that before ordering, because this is not the application CURT lists for it.
CURT's guide lists wiring 56349, described as CWH, 4-flat, for production years 2016-2023. The hitch itself is part 13264, a Class III with a 6000 lb gross trailer weight rating.
Toyota offers a 60.5 in bed and a 73.7 in bed in Access Cab and Double Cab. The hitch listings are by model year, 2016-2023, and none of the condition text names a bed length.