FitsMyTruckWhat fits your pickup, by truck and bed

Supreme Suspensions lift and leveling kits for Toyota Tacoma

A lift kit from Supreme Suspensions: 2 to 3 in front lift. Supreme Suspensions makes it for 1 truck generation, each with its own part number and conditions.

By the FitsMyTruck team. Figures come from Supreme Suspensions's own spec sheets and fit charts, part numbers are checked against the live listings, and the page is reviewed before it goes up. Last reviewed Oct 24, 2026.

The Supreme Suspensions lift and leveling kits for Toyota Tacoma in brief

The Supreme Suspensions Toyota Tacoma line has five part numbers, and every one lifts the front end, with a single kit that also adds 1 in at the rear. Three are spacer lifts coded 3.1(blk)(pro), 3.2(blk)(pro) and 3.3(blk)(pro), giving 2 in, 2.5 in and 3 in of front lift for 2WD and 4WD trucks. The other two are leveling kits for 4X4 trucks. SUS-LVL.31-TACOMA-0523-PRO gives 3 in at the front and 1 in at the rear with a differential drop, spacers and blocks. SUS-FSS.3DD-TAC-1921-PRO gives 3 in at the front with a differential drop. All five reuse the factory shocks. The kits are listed for 2016-2023 trucks, while the maker's titles reach back to 2005. The maker does not publish a largest tire size for any of them. On the three spacer lifts, Supreme says an alignment is always recommended after the height changes.

spacer lift (3 of 5), leveling kitKit type
2 to 3 inFront lift
0 to 1 inRear lift
reuses factoryShocks included or required

Part numbers, applications and specifications

  • 3.1(blk)(pro)

    Toyota Tacoma Front Suspension Lift Kit 2WD 4WD

    • Kit typespacer lift
    • Front lift2 in
    • Rear lift0 in
    • Shocks included or requiredreuses factory
    • Drive fitment2WD and 4WD
    No Amazon listing found

  • 3.2(blk)(pro)

    Toyota Tacoma Front Suspension Lift Kit 2WD 4WD

    • Kit typespacer lift
    • Front lift2.5 in
    • Rear lift0 in
    • Shocks included or requiredreuses factory
    • Drive fitment2WD and 4WD
    No Amazon listing found

  • 3.3(blk)(pro)

    Toyota Tacoma Front Suspension Lift Kit 2WD 4WD

    • Kit typespacer lift
    • Front lift3 in
    • Rear lift0 in
    • Shocks included or requiredreuses factory
    • Drive fitment2WD and 4WD
    No Amazon listing found

  • SUS-LVL.31-TACOMA-0523-PRO

    Toyota Tacoma 4X4 (2005–2023) — 3 in. Front / 1 in. Rear Leveling Lift Kit with Diff Drop, Spacers & Blocks

    • Kit typeleveling kit
    • Front lift3 in
    • Rear lift1 in
    • Shocks included or requiredreuses factory
    • Drive fitment4WD
    No Amazon listing found

  • SUS-FSS.3DD-TAC-1921-PRO

    Toyota Tacoma 4X4 6-Lug (2019–2021) — 3 in. Front Leveling Lift Kit w/ Differential Drop

    • Kit typeleveling kit
    • Front lift3 in
    • Rear lift0 in
    • Shocks included or requiredreuses factory
    • Drive fitment4WD
    No Amazon listing found

Which part number is yours

Sort the five by drive type first. The 3.1, 3.2 and 3.3 spacer lifts cover 2WD and 4WD, with a maker title range of 2005-2023. The two differential drop kits are 4WD only. SUS-FSS.3DD-TAC-1921-PRO is titled for the 2019-2021 4X4 6-Lug, and SUS-LVL.31-TACOMA-0523-PRO is titled for the 2005-2023 4X4. Next, check the lug pattern, because the maker says it will not fit 5-lug models, and the 4WD listings for 2016 and 2019 say 6-lug models only and exclude the TRD Pro. Then check the trim. Per the maker, the 3 in spacers do not fit a 2017 TRD Off-Road or a 2018-2020 TRD Pro, and 2016+ TRD models need upgraded control arms for the 3 in spacer, while up to 2.5 in works without them. That leaves 3.1(blk)(pro) and 3.2(blk)(pro) as the heights that work on 2016+ TRD trucks without new arms, and 3.3(blk)(pro) needs the upgrade where it fits at all.

Trucks it fits

  • 2016-2023 Toyota Tacoma

    • Fits, 3.1(blk)(pro)
    • Fits, 3.2(blk)(pro)
    • Fits with condition, 3.3(blk)(pro)
    • Fits, SUS-LVL.31-TACOMA-0523-PRO
    • Fits, SUS-FSS.3DD-TAC-1921-PRO

    Fits 2WD and 4WD Tacoma trucks, and Supreme Suspensions lists it for 2005 to 2023, but not for 5-lug models. The 3 in spacers do not fit the 2017 TRD Off-Road or the 2018 to 2020 TRD Pro. On 2016 and newer TRD models, the 3 in spacer needs upgraded control arms, while spacers up to 2.5 in work without them. Fits 6-lug 4WD Tacoma trucks, and Supreme Suspensions lists it for 2016. It excludes the TRD Pro.

    All lift and leveling kits for this truck

Before you buy a lift kit

Questions owners ask

How much lift do the Supreme Tacoma spacer kits give?

The three spacer lifts give 2 in, 2.5 in and 3 in of front lift, coded 3.1(blk)(pro), 3.2(blk)(pro) and 3.3(blk)(pro). They are listed for 2WD and 4WD and leave the rear at 0 in.

Do the Supreme kits fit a 5-lug Tacoma?

No. The maker says it will not fit 5-lug models, and the 4WD differential drop listings say 6-lug models only. Check your lug count before ordering.

Can I put the 3 in spacer on a Tacoma TRD Off-Road?

The maker says 3 in spacers do not fit a 2017 TRD Off-Road or a 2018-2020 TRD Pro. On 2016+ TRD models the 3 in spacer needs upgraded control arms, and up to 2.5 in works without.

Which Supreme Tacoma kit adds rear lift?

SUS-LVL.31-TACOMA-0523-PRO adds 1 in at the rear along with 3 in at the front. It is a leveling kit for 4X4 trucks with a differential drop, spacers and blocks.

Do the Tacoma kits come with new shocks?

No. All five part numbers reuse the factory shocks. The maker says an alignment is always recommended after altering the height of your vehicle.

Where these figures come from

Every figure above is Supreme Suspensions's own, from its spec sheets, fit charts and install guides, checked on Oct 24, 2026.

3 maker documents
  • Supreme Suspensions, manufacturer product page (catalog JSON of the Shopify store), read Oct 24, 2026
  • Supreme Suspensions, manufacturer product page (catalog JSON of the Shopify store), read Oct 24, 2026
  • Supreme Suspensions, manufacturer product page (catalog JSON of the Shopify store), read Oct 24, 2026