We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Hitches that fit the 2019-2023 Ford Ranger

3 receiver hitches fit, by the makers' own fit charts. Gross trailer weight ratings run from 5,000 to 7,500 lb; the truck's own tow rating is the limit.

Hitches for the 2019-2023 Ford Ranger: what to know first

Three receiver hitches fit the 2019-2023 Ford Ranger, with no conditions that rule a truck out and none ruled out by the maker. The Ranger comes as a SuperCab and a SuperCrew, with a SuperCrew box floor length of 61 in and a SuperCab box floor length of 72.8 in. Ford publishes no tailgate or bed system details for this truck, so nothing is said here about them. Each hitch has a 2 in receiver. Two are Class III and one is Class IV. The makers list the truck for 2019-2023, with part numbers 13417 from CURT, 76583 from Draw-Tite and 37137 from Reese Towpower. CURT part 13656 is for the 2024-2026 Ranger, is South America only and is not for the US market, so it is left out here.

Standouts by the makers' own figures

Highest trailer weight rating, highest tongue weight, lightest hitch among the hitches you can buy for this truck, taken from each maker's spec sheet.

Every receiver hitch made for this truck

Part numbers for this truck: CURT 13417, Draw-Tite 76583, Reese Towpower 37137. Match the part number on the listing before you order.

  • CURT Class 3 Trailer Hitch, 2" Receiver (custom-fit) 13417

    • Fits
    • Hitch classIII
    • Receiver opening2
    • Gross trailer weight rating6,000 lb
    • Tongue weight rating900 lb
    • Drilling requiredno drilling

    CURT lists this hitch for 2019-2023 Ranger in all styles, with no exclusions. The matching CURT wiring is 56431 (CWH, 7-way plug) for 2019-2023 production years. CURT 13656 is for the 2024-2026 Ranger sold in South America only, so it is not for the US market.

  • Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver (custom-fit) 76583

    • Fits
    • Hitch classIV
    • Receiver opening2
    • Gross trailer weight rating7,500 lb
    • Tongue weight rating1,125 lb
    • Drilling requiredno drilling

    Draw-Tite lists this hitch for 2019-2023 Ranger, with a 20-minute install and no drilling. Draw-Tite lists no exclusions.

  • Reese Towpower Class 3 Multi-Fit Trailer Hitch, 2 Inch Square Receiver 37137

    • Fits
    • Hitch classIII
    • Receiver opening2
    • Gross trailer weight rating5,000 lb
    • Tongue weight rating500 lb
    • Drilling requireddrilling required

    Reese Towpower says this multi-fit hitch fits the 2019-2023 Ford Ranger. It installs in 60 minutes, needs drilling and has no exclusions. The same part also lists the Tacoma, Colorado/Canyon 2015-2022 and Frontier, and its weight-distribution rating equals the 5,000 lb GTW.

2019-2023 Ford Ranger: by the numbers

6,000 lbmedian trailer weight rating across 3 receiver hitches (5,000 to 7,500 lb)
900 lbmedian tongue weight rating across 3 receiver hitches (500 to 1,125 lb)
35 lbmedian hitch weight across 3 receiver hitches (34.63 to 50.75 lb)
67%are III, the most common type here
3 of 3can be bought on Amazon today

Gross trailer weight rating (lb): the 3 highest for this truck

Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver (custom-fit) 765837,500
CURT Class 3 Trailer Hitch, 2" Receiver (custom-fit) 134176,000
Reese Towpower Class 3 Multi-Fit Trailer Hitch, 2 Inch Square Receiver 371375,000

Figures are the makers' own. A receiver hitch with no published figure is left out.

How to choose for this truck

With one product type, a custom-fit receiver hitch, the choice is about ratings and install. The lowest gross trailer weight rating is 5000 lb, on Reese Towpower Class 3 Multi-Fit 37137 with a 500 lb tongue weight. The highest is 7500 lb, on Draw-Tite Class 4 part 76583, with a 1125 lb tongue weight. CURT Class 3 part 13417 lists 6000 lb and 900 lb. Draw-Tite lists 20 minutes and no drilling, and CURT lists no drilling. Reese lists 60 minutes with drilling required. The same Reese part also lists the Tacoma, Colorado/Canyon 2015-2022 and Frontier, which makes it a multi-fit design, and its weight-distribution rating equals its 5000 lb gross rating. CURT's guide names wiring 56431, a 7-way plug, for production years 2019-2023. No factory option changes which of the three you can use. Pick the rating that covers your trailer, then decide how much of the install you want to do. The tongue weight ratings are 500 lb, 900 lb and 1125 lb, in the same order as the gross ratings of 5000 lb, 6000 lb and 7500 lb.

Watch-outs before you buy

None of the three is ruled out or carries a fit condition, and none is limited to one generation or one truck. The notes to check are small. Reese 37137 requires drilling, while the other two do not. It is also shared with other trucks, so confirm the listing names the Ranger and 2019-2023. CURT 13656 is for the 2024-2026 Ranger, South America only, and should not be ordered for a US-market truck. Tailgate and bed systems are not published, so there is nothing to check against them. Before buying, match the part number, confirm the model year falls in 2019-2023, and confirm your cab, SuperCab or SuperCrew, and its box length of 72.8 in or 61 in.

What on the 2019-2023 Ford Ranger decides fit

2beds offered: SuperCrew box (61 in), SuperCab box (72.8 in)
2cab styles: SuperCab, SuperCrew

2 of the 2 receiver hitches made for the 2024-2026 Ford Ranger are also made for this truck.

Before you buy hitches for a Ford Ranger

Questions owners ask

What hitch fits a 2019-2023 Ford Ranger?

Three fit: CURT 13417, Draw-Tite 76583 and Reese Towpower 37137, all with a 2 in receiver. Each maker lists the Ranger for 2019-2023 with no exclusions.

What is the highest towing rating listed for the Ranger?

The highest gross trailer weight rating is 7500 lb with a 1125 lb tongue weight, on Draw-Tite Class 4 part 76583. The lowest is 5000 lb with a 500 lb tongue weight, on Reese Towpower 37137.

Does the Ranger hitch need drilling?

Reese Towpower 37137 lists drilling required and 60 minutes. CURT 13417 and Draw-Tite 76583 list no drilling, and Draw-Tite lists its install at 20 minutes.

What wiring does CURT list for the Ranger?

CURT's guide lists wiring 56431, described as CWH, 7-way plug, for production years 2019-2023. The hitch itself is part 13417, a Class III rated 6000 lb gross trailer weight.

Does a 2024 Ranger hitch fit?

CURT 13656 is listed for the 2024-2026 Ranger, South America only. It is not for the US market. The three parts covered here are listed for 2019-2023.

Will the Reese hitch fit other trucks too?

Yes. The Reese Towpower multi-fit part 37137 also lists the Tacoma, Colorado/Canyon 2015-2022 and Frontier. For the Ranger it lists 2019-2023 with no exclusions.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

3 maker documents
Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver (custom-fit) 76583Check price on Amazon