FitsMyTruckWhat fits your pickup, by truck and bed

Bed racks that fit the 2019-2023 Ford Ranger supercrew

5 bed racks and toolboxes fit and 1 do not, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' own charts and install guides; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2019-2023 Ford Ranger supercrew: what to know first

A 2019-2023 Ford Ranger SuperCrew has a 61 in box floor length and a 44.8 in wheel well width, and those two figures set the space you have for a bed rack or toolbox. Five products fit with no condition attached, and one does not. The Ranger comes in SuperCab and SuperCrew cabs. The other box listed for these years is the SuperCab box at 72.8 in, which has its own part numbers. No tailgate details, bed-system details or hitch note are listed for the Ranger, so there is no factory tie-down layout to compare against. Makers label this box a 5 ft bed in their part names, and the part numbers below are the ones tied to that label.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 00-58-FA-1315, Leitner Designs 00-5.0NSAC-1676, Leitner Designs 00-50-FTA-1375, DECKED YF3. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 00-58-FA-1315

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 00-58-FA-1315 for the 2019 to 2023 Ford Ranger with a 5 ft bed.

  • Leitner ACS FORGED NDNS 00-5.0NSAC-1676

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED NDNS part 00-5.0NSAC-1676 for the 2019 to 2023 Ford Ranger with a 5 ft bed.

  • Leitner ACS FORGED TONNEAU rack only 00-50-FTA-1375

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-50-FTA-1375 is the Forged Tonneau rack (rack only, no cover) for the 2019 to 2026 Ford Ranger with a 5 ft bed.

  • Prinsu CBI Cab Height Bed Rack

    • Fits
    • Static load900 lb
    No Amazon listing found

    Prinsu lists this rack for the 2019-2021 Ranger and gives no bed length. It is not listed for 2022-2023.

  • No Amazon listing found

    Per DECKED's fitment guide, the 2019-2023 Ford Ranger with a 5 ft bed takes drawer system SKU YF3.

  • DECKED Tool Box

    • Does not fit

    The maker's fitment chart shows the Tool Box as not available for this midsize truck, and it says the Tool Box fits full-size trucks.

2019-2023 Ford Ranger supercrew: by the numbers

1,400 lbmedian static load across 4 bed racks and toolboxes (900 to 1,400 lb)
800 lbmedian dynamic load across 3 bed racks and toolboxes (800 to 800 lb)
23 inmedian height above rail across 4 bed racks and toolboxes (20.5 to 23 in)
20%are C-channel clamp, the most common type here
0 of 5can be bought on Amazon today
1product the makers rule out for this bed

Static load (lb): the 4 highest for this bed

Leitner ACS FORGED Active Cargo System 00-58-FA-13151,400
Leitner ACS FORGED NDNS 00-5.0NSAC-16761,400
Leitner ACS FORGED TONNEAU rack only 00-50-FTA-13751,400
Prinsu CBI Cab Height Bed Rack 900

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

Three product families are listed. Leitner ACS FORGED supplies three: the Active Cargo System (00-58-FA-1315, C-channel clamp), the NDNS (00-5.0NSAC-1676) and the TONNEAU rack only (00-50-FTA-1375, T-slot bed rail). Prinsu supplies the CBI Cab Height Bed Rack, with no part number given. DECKED supplies a Drawer System (YF3) that fits and a Tool Box that does not. Static load figures run from 900 lb to 1400 lb. The Prinsu rack holds the low value, 900 lb static, with no dynamic figure published. The three Leitner racks hold the high value, 1400 lb static and 800 lb dynamic (driving). DECKED lists no rating here, and no maker says whether its rack works with a tonneau cover. Model year is the factor that changes the answer most. The Prinsu listing covers 19-21 Ford Ranger, and 2022-2023 is not listed, while the Leitner products run 2019-2023 or 2019-2026 and the DECKED drawer system covers 2019-2023. If your Ranger is a 2022 or 2023, the Leitner racks and the YF3 drawer system are the listings that name your year. No factory option is tied to a condition on these products.

Watch-outs before you buy

The DECKED Tool Box is the one product that does not fit. DECKED's guide marks the Tool Box column N/A for this midsize truck and says the Tool Box fits full-size trucks. The Prinsu CBI Cab Height Bed Rack counts as a fit, but its listing reads 19-21 Ford Ranger, gives no bed length and does not list 2022-2023, so a 2022 or 2023 owner should not treat it as confirmed. No product is limited to a single generation or truck. Before ordering, match the part number to the 5 ft Ranger listing, check your model year against the Prinsu range, and confirm that the listing names the Ranger SuperCrew box and not the longer SuperCab box.

What on the 2019-2023 Ford Ranger decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

2beds offered: SuperCrew box (61 in), SuperCab box (72.8 in)
2cab styles: SuperCab, SuperCrew

5 of the 5 bed racks and toolboxes made for the supercab are also made for this one, with a different part number for each bed length.

Before you buy racks and toolboxes for a Ford Ranger

Questions owners ask

Does a DECKED Tool Box fit a 2019-2023 Ford Ranger SuperCrew?

No. DECKED's fitment guide lists the Tool Box column as N/A for this midsize truck, and the FAQ says the Tool Box fits full-size trucks. The Drawer System, SKU YF3, is listed for the Ranger (2019-2023) 5 ft.

What bed rack load ratings are listed for the Ranger SuperCrew?

Leitner lists 1400 lb static and 800 lb dynamic (driving) load for three racks. The Prinsu CBI Cab Height Bed Rack lists 900 lb static, and no dynamic figure is published for it.

Will the Prinsu CBI rack fit a 2022 Ranger SuperCrew?

The listing is for 19-21 Ford Ranger, with no bed length given, and 2022-2023 is not listed. For a 2022 or 2023 truck, the Leitner racks are the ones listed for your year.

Which Leitner part number is the Active Cargo System for the Ranger SuperCrew?

00-58-FA-1315. Leitner lists it as Ford Ranger, 2019-2023, 5 ft Bed, with a C-channel clamp mount, 1400 lb static load and 800 lb dynamic load.

What is the bed floor length of the Ranger SuperCrew?

The SuperCrew box floor is 61 in, with a wheel well width of 44.8 in. The SuperCab box is longer at 72.8 in, so confirm which box your truck has.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

3 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026