FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Bed racks that fit the 2022-2026 Toyota Tundra 6.5 ft bed

6 bed racks and toolboxes fit, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' charts and install guides, with 17% of the entries taken from retailer listings where a maker publishes no chart; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2022-2026 Toyota Tundra 6.5 ft bed: what to know first

Bed racks and toolboxes for the 2022-2026 Toyota Tundra with the Standard Bed. That bed has a nominal length of 6.5 ft, a floor length of 77.6 in and a wheel well width of 48.7 in. Toyota offers the Tundra with Double Cab and CrewMax cab options and three bed lengths: Short at 5.5 ft, Standard at 6.5 ft and Long at 8.1 ft. These products are for the Standard Bed only. Of 6 products, 6 fit, 0 fit with a condition and 0 do not fit. The makers behind them are Leitner, DECKED and DeeZee. Two Toyota features shape what goes in the bed: a deck rail system with four adjustable tie-down cleats, and a power open-and-close tailgate with hands-free knee-lift assist on some grades. The maker's own bed labels do not always match Toyota's, so the part number on the listing matters more than the bed name.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 04-78-FA-1512, Leitner Designs 00-NSBO6.6-1593, Leitner Designs 00-66-FTA-1379, DECKED XT4, DeeZee DZ8170SB. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 04-78-FA-1512

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 04-78-FA-1512 for the 2022 and newer Toyota Tundra with a 6 ft 6 in bed.

  • Leitner ACS FORGED NDNS 00-NSBO6.6-1593

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-NSBO6.6-1593 is the Forged NDNS bed rack for the 2022 and newer Toyota Tundra with a 6 ft 6 in bed.

  • Leitner ACS FORGED TONNEAU rack only 00-66-FTA-1379

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-66-FTA-1379 is the Forged Tonneau rack (rack only, no cover) for the 2007 to 2026 Toyota Tundra Regular Cab and Double Cab with a 6 ft 7 in bed.

  • DECKED Tool Box

    • Fits
    No Amazon listing found

    The maker's fitment chart shows Tool Box options for the 2022-current Toyota Tundra with a 6 ft 5 in bed. The Tool Box fits nearly every full-size truck from 2001 to today, but not RamBox, service bodies, the GMC CarbonPro bed, Chevy Silverado EV, Ford F-150 Heritage Edition or Nissan Titan.

  • No Amazon listing found

    DECKED lists drawer system SKU XT4 for the 2022-current Toyota Tundra with a 6 ft 5 in bed.

  • DeeZee HARDware Series Crossover Tool Box DZ8170SB

    • Fits
    Check price on Amazon

    DeeZee lists DZ8170 for the 2000-2026 Tundra with a 6.5 ft bed. Confirm with the maker before ordering.

2022-2026 Toyota Tundra 6.5 ft bed: by the numbers

1,400 lbmedian static load across 3 bed racks and toolboxes (1,400 to 1,400 lb)
800 lbmedian dynamic load across 3 bed racks and toolboxes (800 to 800 lb)
23 inmedian height above rail across 3 bed racks and toolboxes (23 to 23 in)
17%are C-channel clamp, the most common type here
1 of 6can be bought on Amazon today
50%of these bed racks and toolboxes publish a static load

Static load (lb): the 3 highest for this bed

Leitner ACS FORGED Active Cargo System 04-78-FA-15121,400
Leitner ACS FORGED NDNS 00-NSBO6.6-15931,400
Leitner ACS FORGED TONNEAU rack only 00-66-FTA-13791,400

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

The 6 products come in three types. Leitner supplies 3: the ACS FORGED Active Cargo System (04-78-FA-1512), the ACS FORGED NDNS (00-NSBO6.6-1593) and the ACS FORGED TONNEAU rack only (00-66-FTA-1379). DECKED supplies 2: the Tool Box and the Drawer System, SKU XT4. DeeZee supplies 1: the HARDware Series Crossover Tool Box, DZ8170SB. Load ratings are published for the Leitner racks only, and all three carry the same figures, 1400 lb static and 800 lb dynamic (driving). The low and the high are therefore the same value. DECKED and DeeZee list no load figure. Mount type is given for two Leitner parts: the ACS FORGED uses a C-channel clamp and the TONNEAU rack only uses a T-slot bed rail. No mount type is given for the NDNS. None of the makers says whether any of the six works with a tonneau cover. So start with the job. A rack carries loads above the bed. A drawer system or crossover box stores gear in the bed. Then check the factory options. The four-cleat deck rail system and the power tailgate with knee-lift assist, offered by grade, are the two Tundra items that touch the bed and tailgate. None of the six has a condition tied to either one.

Watch-outs before you buy

None of the six is ruled out or fits only with a condition, so what to check is the listing itself. The Leitner ACS FORGED variants name the bed as 6-6, and the TONNEAU rack variant names a 6-7 bed for a Tundra Reg. & Double Cab from 2007-2026. Those are the maker's labels, not Toyota's 6.5 ft, so compare part numbers. The DeeZee listing comes from a search summary of the product page rather than the maker's listing itself, so confirm it with DeeZee before ordering. DECKED says its Tool Box fits nearly every full-size truck from 2001 to today, but not RamBox, service bodies, the GMC CarbonPro bed, the Chevy Silverado EV, the Ford F-150 Heritage Edition or the Nissan Titan. Before buying, match the part number, the bed length and your cab style.

What on the 2022-2026 Toyota Tundra decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

3beds offered: 5.5 ft (65.6 in), 6.5 ft (77.6 in), 8.1 ft (96.5 in)
1tailgate system: power open-and-close tailgate with hands-free knee-lift assist (by grade)
1factory bed system: deck rail system with four adjustable tie-down cleats
2cab styles: Double Cab, CrewMax

6 of the 6 bed racks and toolboxes made for the 5.5 ft bed are also made for this one, with a different part number for each bed length. 1 of the 1 bed racks and toolboxes made for the 8.1 ft bed are also made for this one, with the same part numbers.

Before you buy racks and toolboxes for a Toyota Tundra

Questions owners ask

What size is the Tundra Standard Bed?

On the 2022-2026 Tundra, the Standard Bed is 6.5 ft nominal, with 77.6 in of floor length and 48.7 in between the wheel wells. The Short Bed is 5.5 ft and the Long Bed is 8.1 ft.

Which bed racks fit a 2022 Tundra with a 6.5 ft bed?

Three Leitner racks are listed: 04-78-FA-1512, 00-NSBO6.6-1593 and 00-66-FTA-1379. Each shows 1400 lb static and 800 lb dynamic (driving) load. Their variant names label the bed 6-6 or 6-7, so confirm the part number.

Does the DECKED drawer system fit a 2022 Tundra 6.5 ft bed?

DECKED's fitment guide lists the Toyota Tundra (2022-current) 6' 5" with drawer system SKU XT4. For this truck, the maker's Tool Box entry says See Options, so check the options before ordering.

How much weight can a Leitner rack hold on a Tundra?

The maker lists 1400 lb static and 800 lb dynamic (driving) for all three Leitner racks for this bed. DECKED and DeeZee publish no load figure for their products.

Is the DeeZee crossover tool box confirmed for a 6.5 ft Tundra?

Not yet. DeeZee lists the DZ8170SB for a Tundra 6.5' bed 2000-2026, but that comes from a search summary because the product page could not be read directly. Confirm it with DeeZee before ordering.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

3 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026
  • DeeZee, manufacturer product page (HTML) not fetched directly: Cloudflare 403; values read from a search-engine extract of the page, read Oct 24, 2026
DeeZee HARDware Series Crossover Tool Box DZ8170SBCheck price on Amazon