FitsMyTruckWhat fits your pickup, by truck and bed

Bed racks that fit the 2019-2023 Ford Ranger supercab

5 bed racks and toolboxes fit and 1 do not, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' own charts and install guides; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2019-2023 Ford Ranger supercab: what to know first

Owners of the 2019-2023 Ford Ranger SuperCab are working with a 72.8 in box floor length and a 44.8 in wheel well width. That makes it the longer of the two boxes listed for the Ranger, next to the 61 in SuperCrew box. Five products fit with no condition attached, and one does not. Cab styles for the model are SuperCab and SuperCrew. No tailgate details, bed-system details or hitch note are listed, so nothing here covers factory tie-downs or tailgate type. What is listed is a clean set of part numbers: makers label this box a 6 ft bed, and every Leitner and DECKED number below is tied to that label. A number written for the 5 ft listing belongs to the shorter box and will not suit this truck.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 00-71-FA-1341, Leitner Designs 00-6.0NSAC-1677, Leitner Designs 00-60-FTA-1377, DECKED YF4. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 00-71-FA-1341

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 00-71-FA-1341 for the 2019 to 2023 Ford Ranger with a 6 ft bed.

  • Leitner ACS FORGED NDNS 00-6.0NSAC-1677

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED NDNS part 00-6.0NSAC-1677 for the 2019 to 2023 Ford Ranger with a 6 ft bed.

  • Leitner ACS FORGED TONNEAU rack only 00-60-FTA-1377

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-60-FTA-1377 is the Forged Tonneau rack (rack only, no cover) for the 2019 to 2023 Ford Ranger with a 6 ft bed.

  • Prinsu CBI Cab Height Bed Rack

    • Fits
    • Static load900 lb
    No Amazon listing found

    Prinsu lists this rack for the 2019-2021 Ranger and gives no bed length. It is not listed for 2022-2023.

  • No Amazon listing found

    Per DECKED's fitment guide, the 2019-2023 Ford Ranger with a 6 ft bed takes drawer system SKU YF4.

  • DECKED Tool Box

    • Does not fit

    The maker's fitment chart shows the Tool Box as not available for this midsize truck, and it says the Tool Box fits full-size trucks.

2019-2023 Ford Ranger supercab: by the numbers

1,400 lbmedian static load across 4 bed racks and toolboxes (900 to 1,400 lb)
800 lbmedian dynamic load across 3 bed racks and toolboxes (800 to 800 lb)
23 inmedian height above rail across 4 bed racks and toolboxes (20.5 to 23 in)
20%are C-channel clamp, the most common type here
0 of 5can be bought on Amazon today
1product the makers rule out for this bed

Static load (lb): the 4 highest for this bed

Leitner ACS FORGED Active Cargo System 00-71-FA-13411,400
Leitner ACS FORGED NDNS 00-6.0NSAC-16771,400
Leitner ACS FORGED TONNEAU rack only 00-60-FTA-13771,400
Prinsu CBI Cab Height Bed Rack 900

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

Sort by product family first. Leitner ACS FORGED has three: the Active Cargo System (00-71-FA-1341, C-channel clamp), the NDNS (00-6.0NSAC-1677) and the TONNEAU rack only (00-60-FTA-1377, T-slot bed rail). Prinsu has one, the CBI Cab Height Bed Rack, with no part number given. DECKED has two, a Drawer System (YF4) that fits and a Tool Box that does not. On load, the spread is 900 lb to 1400 lb static. The Prinsu rack sits at 900 lb static and publishes no dynamic figure. The three Leitner racks sit at 1400 lb static and 800 lb dynamic (driving). No DECKED rating is listed, and no maker says whether its rack works with a tonneau cover. Model year then narrows things. Prinsu lists 19-21 Ford Ranger and does not list 2022-2023, while the Leitner NDNS and Active Cargo System run 2019-2023, the TONNEAU rack runs 2019-2023 in this variant, and DECKED lists 2019-2023. For a 2022 or 2023 SuperCab, Prinsu is the one to hold back on. No factory option is tied to a condition on these products.

Watch-outs before you buy

Only one product is ruled out: the DECKED Tool Box, which DECKED's guide lists as N/A for this midsize truck while its FAQ says it fits full-size trucks. The one to read closely is the Prinsu CBI Cab Height Bed Rack. It counts as a fit, yet the listing reads 19-21 Ford Ranger, shows no bed length and leaves out 2022-2023. No product here is limited to one generation or truck. Check three things before you click buy: the part number matches the 6 ft listing, your model year falls inside the range the maker prints, and the listing names the Ranger and its 72.8 in SuperCab box.

What on the 2019-2023 Ford Ranger decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

2beds offered: SuperCrew box (61 in), SuperCab box (72.8 in)
2cab styles: SuperCab, SuperCrew

5 of the 5 bed racks and toolboxes made for the supercrew are also made for this one, with a different part number for each bed length.

Before you buy racks and toolboxes for a Ford Ranger

Questions owners ask

Can I put a DECKED Tool Box in a 2019-2023 Ranger SuperCab?

No. DECKED's fitment guide lists the Tool Box column as N/A for this midsize truck, and the FAQ says the Tool Box fits full-size trucks. The Drawer System, SKU YF4, is listed for the Ranger (2019-2023) 6 ft.

What part number do I need for the Leitner TONNEAU rack on a Ranger SuperCab?

00-60-FTA-1377. Leitner lists it as Ford Ranger, 2019-2023, 6 ft Bed, with a T-slot bed rail mount, 1400 lb static load and 800 lb dynamic load.

How do the Ranger SuperCab rack load ratings compare?

Leitner lists 1400 lb static and 800 lb dynamic (driving) load on three racks. The Prinsu CBI Cab Height Bed Rack lists 900 lb static and no dynamic figure.

Does the Prinsu CBI rack cover a 2023 Ranger SuperCab?

Not per its listing. Prinsu lists 19-21 Ford Ranger with no bed length, and 2022-2023 is not listed. The Leitner racks list 2019-2023, so they name that year.

How long is the Ranger SuperCab box?

The SuperCab box floor is 72.8 in, with a 44.8 in wheel well width. The SuperCrew box is shorter at 61 in and uses different part numbers.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

3 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026