We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
23 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 0 to 6 inches.
The makers list 23 lift and leveling kits for the 2020-2026 Jeep Gladiator, all as fitting, with none needing a condition and none ruled out. Every kit is for 4WD, and TeraFlex notes that the Gladiator is sold as 4WD only. The bed is the 5-foot bed with a floor length of 60.3 in. The tailgate is the easy-lift tailgate, and the bed features integrated tie-downs in the steel box plus the Trail Rail cargo system with a 115-volt outlet, which comes with the available Cargo Group. Five makers appear: Rough Country with 10 kits, Zone Offroad Products with 5, TeraFlex with 3, Daystar with 3 and Fabtech with 2. The lifts start at 0.75 in of front spacer and reach 6 in on one Rough Country kit. Several kits carry conflicting years or none at all, so confirm your year with the maker.
6 in
Kit type: full suspension liftFront lift: 6 inRear lift: not published
Fits Rough Country 91230 fits the 2020-2023 Gladiator JT 4WD, Rubicon and non-Rubicon. The kit has progressive-rate coil springs, control arm drop brackets, a pit...
Check price on Amazon37 in tied with 6 others
Kit type: spacer liftFront lift: 3.5 inRear lift: not published
Fits Rough Country 63730 fits the 2020-2023 Gladiator JT 4WD and levels the front with the rear. The kit has front and rear coil spring spacers, a forged track ba...
Check price on Amazon0 in
Kit type: spacer liftFront lift: 0 inRear lift: 0.75 in
Fits Daystar KJ09192BK is for 4WD and is listed for the 2020-2024 Gladiator JT, 4 door models. These high-density polyurethane rear spacers raise the rear of the ...
Check price on AmazonRough Country 7597 is a 0.75 inch leveling kit for the Jeep Gladiator 4WD, with two front coil spring spacers that remove the nose-down rake. The same kit is sold for the Gladiator JT and the Wrangler JK and JL, and the years are not stated, so confirm the years and trim with the maker before ordering. Install time is 1-3 hours.
Rough Country 63430 (base kit 63400, no shocks) fits the 2020-2023 Gladiator JT 4WD, though one of the maker's own titles for it says 2020-2024. It has front coil spring spacers, sway bar links and bump stops, with shock options N3 63430A, M1 63440 and V2 63470. It does not fit Mojave models with FOX 2.5 shocks. Install time is 2-3 hours.
Rough Country 64830 (also listed as 63830c) fits the 2020-2023 Gladiator JT 4WD. The kit has coil springs, sway bar links, bump stop spacers and four Premium N3 shocks, with V2, M1 or M1R shocks selectable. It does not fit the 3.0L EcoDiesel V6 because of the motor weight, or Mojave models with FOX 2.5 shocks. Install time is 2-3 hours.
Rough Country 63730 fits the 2020-2023 Gladiator JT 4WD and levels the front with the rear. The kit has front and rear coil spring spacers, a forged track bar with rear track bar bracket, sway bar links, bump stops and four Premium N3 shocks (V2 and M1 selectable). It does not fit Mojave models with FOX 2.5 shocks. Install time is 3-4 hours.
Rough Country 64930 fits the 2020-2023 Gladiator JT 4WD. The kit has lifted front and rear coil springs, a forged track bar, sway bar links, bump stops and four Premium N3 shocks (V2, M1 and M1R selectable). It does not fit the 3.0L EcoDiesel V6 or Mojave models with FOX 2.5 shocks. Install time is 3-4 hours.
Rough Country 91230 fits the 2020-2023 Gladiator JT 4WD, Rubicon and non-Rubicon. The kit has progressive-rate coil springs, control arm drop brackets, a pitman arm, track bar brackets, extended brake lines, an upgraded front driveshaft, a carrier bearing drop bracket and four Premium N3 shocks (M1 and M1R selectable). It does not fit the 3.0L EcoDiesel V6 or Mojave models with FOX 2.5 shocks. Install time is 6-8 hours.
Rough Country 61300 fits the 2024-2026 Gladiator JT 4WD. The kit has front coil spring spacers, sway bar links and bump stops, and the base kit has no shocks (N3 61330, M1 61340 and V2 61370 versions are selectable). It does not fit Mojave models with FOX 2.5 shocks. Install time is 2-3 hours.
Rough Country 78430 fits the 2024-2026 Gladiator JT 4WD. The kit has coil springs matched to the factory spring rate, sway bar links, bump stop spacers and four Premium N3 shocks (M1 78440, V2 78470 and M1R 78444 selectable). It does not fit Mojave models with FOX 2.5 shocks. Install time is 2-3 hours.
Rough Country 78800 fits the 2024-2026 Gladiator JT 4WD. The kit has lifted dual-rate front and rear coil springs, a forged track bar with rear bracket, sway bar links, bump stops and four Premium N3 shocks. A no-shocks version (78800) and N3 78930, M1 78940, V2 78970 and M1R 78944 versions are also offered, and Rough Country gives no tire size. It does not fit Mojave models with FOX 2.5 shocks. Install time is 3-4 hours.
Rough Country 78730 fits the 2024-2026 Gladiator JT 4WD. The kit has front and rear coil spring spacers, a forged track bar with rear bracket, sway bar links, bump stops and four Premium N3 shocks (M1 78740 and V2 78770 selectable). It does not fit Mojave models with FOX 2.5 shocks. Install time is 3-4 hours.
Fabtech K4159 is for 4WD gas Gladiators only and is listed for 2020-2026. It has front dual-rate coil springs, rear coil spacers, front and rear sway bar links, bump stop extensions and shock extension kit FTS24241. Fabtech says install takes about a couple of hours.
Fabtech K4167M is for 4WD gas Gladiators only and is listed for 2020-2026. It has long-travel dual-rate front and rear coils, short-arm lower links (1.75 in front, 2.0 in rear) with 5 ton joints, a Trail box kit, a drag link kit, track bar brackets, bump stop extensions, and two front and two rear Stealth shocks.
TeraFlex 1364000 (also 1364020) is for the 4WD JT Gladiator pickup, and TeraFlex gives no years or trims. It does not include shocks and requires longer shocks, with Falcon recommended. EcoDiesel models need the 1 in front coil spring spacer kit 1155100 (not included), bump stop extensions of 2 in front and 1 in rear are listed for 33 in or 35 in tires, wheels need 4.75 in backspacing or less or the offset adapter pair 1057000, and install takes about 5.5 hours.
TeraFlex 1375300 is for the 4WD JT Gladiator pickup, and TeraFlex gives no years or trims. It does not include shocks and requires longer shocks, with Falcon recommended. Caster correction is required and not included (front lower sport control arms 1253000 and frame bracket kit 1938125, or adjustable arms, or HD forged adjustable track bar 1753420), it needs aftermarket wheels with 4.75 in backspacing or less or adapters 1057000, and install takes about 5.5 hours.
TeraFlex 1365000 (also 1365020) is for the 4WD JT Gladiator pickup, and TeraFlex gives no years. It does not include shocks and requires longer shocks, and TeraFlex says Falcon shocks are engineered to work with its lift coils. EcoDiesel models need the 1 in front coil spring spacer kit 1155100 (not included), caster correction is required and not included (sport bracket kits 1938125 and 1938225, adjustable track bars 1753420 and 1764420), it needs aftermarket wheels with 4.75 in backspacing or less or adapters 1057000, and install takes about 5.5 hours.
Daystar KJ09176BK is for 4WD and is listed for 2018-2024 JL and JT (Wrangler JL 2018-2024 and Gladiator JT 2020-2024). It fits the 4 door Gladiator, is front only, uses polyurethane spacers with shock extensions, and fits 35 in tires on all models.
Daystar KJ09182BK is for 4WD, and Daystar's description says model years 2018 through 2025 but its tags list 2018-2024 Wrangler JL and 2020-2024 Gladiator JT. It is a polyurethane spacer that mounts on top of the factory coil springs.
Daystar KJ09192BK is for 4WD and is listed for the 2020-2024 Gladiator JT, 4 door models. These high-density polyurethane rear spacers raise the rear of the pickup 0.75 in to level height after you add aftermarket components.
Zone ZONJ32 is a 2 inch leveling kit for the 4WD Jeep Gladiator JT, sold without shocks. Zone lists 2020-2025 fitment, though the kit name says 20-26. Zone says to run the Pre-Installation Check in the instructions to verify fitment.
Zone ZONJ32F is a 2 inch leveling kit for the 4WD Jeep Gladiator JT, with FOX 2.0 Adventure Series shocks. Zone lists 2020-2025 fitment, though the kit name says 20-26. Zone says to run the Pre-Installation Check in the instructions to verify fitment.
Zone ZONJ32N is a 2 inch leveling kit for the 4WD Jeep Gladiator JT, with Nitro Series shocks. Zone lists 2020-2025 fitment, though the kit name says 20-26. Zone says to run the Pre-Installation Check in the instructions to verify fitment.
Zone ZONJ34F is a 3 inch lift kit for gas 4WD Jeep Gladiator JT models, with FOX 2.0 Adventure Series shocks. Zone lists 2020-2025 fitment, though the kit name says 20-26.
Zone ZONJ34N is a 3 inch lift kit for gas 4WD Jeep Gladiator JT models, with Nitro Series shocks. Zone lists 2020-2025 fitment, though the kit name says 20-26.
The 23 kits are 10 leveling kits, 9 full suspension lifts and 4 spacer lifts. The leveling kits come in 0.75 in (Rough Country 7597, Daystar KJ09182BK), 1.5 in (Daystar KJ09176BK), 2 in (Zone ZONJ32, ZONJ32F, ZONJ32N) and 2.5 in (Rough Country 63430, 64830, 61300, 78430). Rough Country splits by years: 63430, 64830, 63730, 64930 and 91230 list 2020-2023, while 61300, 78430, 78800 and 78730 list 2024-2026. Six kits are 3.5 in at the front, and the only 6 in kit is Rough Country 91230. The largest tire is 37 in on 9 kits, including Fabtech K4159 and K4167M, TeraFlex 1375300 and 1365000, and Zone ZONJ34F and ZONJ34N. Nine more list 35 in and 5 state none. Shocks are included on 12 kits, reused on 6 and required as aftermarket on the 3 TeraFlex kits. Install time grows with size: Rough Country lists 2-3 hours for its 2.5 in kits and 6-8 hours for 91230, and TeraFlex says about 5.5 hours.
Every kit is listed as a fit, but the maker text attaches conditions. Nine Rough Country kits say they do not fit Mojave models with FOX 2.5 shocks. Rough Country 64830, 64930 and 91230 do not fit the 3.0L EcoDiesel V6, and TeraFlex 1364000 and 1365000 need front spacer kit 1155100 for EcoDiesel. Years are loose: Rough Country 7597 states none, 63430 shows 2020-2024 in one place and 2020-2023 in another, and TeraFlex lists no years or trims. TeraFlex 1375300 and 1365000 need caster correction that is not included. Confirm the year and trim with the maker before ordering.
Nine of the ten Rough Country kits say they do not fit Mojave models with FOX 2.5 shocks. Rough Country 7597 carries no such note, but its years are not stated, so confirm with the maker.
Rough Country 64830, 64930 and 91230 do not fit the 3.0L EcoDiesel V6 because of motor weight. TeraFlex 1364000 and 1365000 need the 1 in front coil spring spacer kit 1155100, sold separately.
The makers list 37 in on 9 kits, from 3-inch and 3.5-inch kits. Nine more kits list 35 in, and 5 state no tire size.
Rough Country lists 1-3 hours for 7597, 2-3 hours for its 2.5 in kits, 3-4 hours for 3.5 in kits and 6-8 hours for 91230. TeraFlex says about 5.5 hours for its kits.
No. TeraFlex 1364000, 1375300 and 1365000 do not include shocks, and all three require longer shocks than the factory ones. TeraFlex recommends Falcon shocks, and says Falcon shocks are engineered to work with its lift coils.