FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Fabtech 3-inch Trail lift kit with Stealth shocks

A lift kit from Fabtech: 3 in front lift. Fabtech makes it for 1 truck generation, each with its own part number and conditions.

By the FitsMyTruck team. Figures come from Fabtech's own spec sheets and fit charts, part numbers are checked against the live listings, and the page is reviewed before it goes up. Last reviewed Oct 24, 2026.

The Fabtech 3-inch Trail lift kit with Stealth shocks in brief

Fabtech K4167M is the 3-inch Trail kit for the Jeep Gladiator, and it is the version that ships with new shocks. The maker lists it for the Jeep Gladiator JT 4WD, gas models, 2020 to 2026, as a full suspension lift with a 3 in front lift. The shocks are 2 front and 2 rear Stealth shocks. Fabtech lists 37 in as the largest tire. The kit parts are long-travel dual-rate front and rear coils, short-arm lower links (1.75 in front, 2.0 in rear) with 5 ton joints, a Trail box kit, a drag link kit, track bar brackets and bump stop extensions. The maker gives one 3 in figure and no separate rear value. One part number covers the 2020 to 2026 Jeep Gladiator, and the maker's footnotes limit it to gas models with 4WD.

full suspension liftKit type
3 inFront lift
not publishedRear lift
includedShocks included or required

Specifications from the maker

full suspension liftKit type
3 inFront lift
not publishedRear lift. page gives one 3 in figure, no separate rear value
includedShocks included or required
37 inLargest tire the maker lists. 37/12.50R17/R18 need cutting; stock fenders up to 35/12.50R20
4WDDrive fitment
For heavy off-road use a front driveshaft is required (footnote 249) and a rear driveshaft is required (footnote 250).Alignment and driveline notes

Which part number is yours

K4167M is the only part number on this line. The maker lists Jeep Gladiator JT 4WD gas models, 2020 to 2026, and footnote 182 reads: Fits Gas Models Only. Match the part number K4167M and the 4WD drive fitment on the listing. The driveline note matters if the truck sees heavy off-road use. Per the maker, a front driveshaft is required (footnote 249) and a rear driveshaft is required (footnote 250) for that use, and the listing does not say which driveshaft parts to buy, so ask the maker before ordering. Tire notes from the maker are that stock fenders take up to 35/12.50R20, while 37/12.50R17 and R18 sizes need cutting. Fabtech lists 37 in as the largest tire. Because the kit includes the lower links, the Trail box kit and the drag link kit, the parts list is larger than a spring-and-spacer kit. The maker does not publish an install time for K4167M.

Trucks it fits

  • 2020-2026 Jeep Gladiator

    • Fits, K4167M

    Fabtech K4167M is for 4WD gas Gladiators only and is listed for 2020-2026. It has long-travel dual-rate front and rear coils, short-arm lower links (1.75 in front, 2.0 in rear) with 5 ton joints, a Trail box kit, a drag link kit, track bar brackets, bump stop extensions, and two front and two rear Stealth shocks.

    Check price on AmazonAll lift and leveling kits for this truck

Before you buy a lift kit

Questions owners ask

Does the Fabtech 3-inch Trail kit come with shocks?

Yes. Per the maker, K4167M includes 2 front and 2 rear Stealth shocks, along with long-travel dual-rate front and rear coils, a Trail box kit, a drag link kit and bump stop extensions.

Do I need new driveshafts with K4167M?

For heavy off-road use, the maker says a front driveshaft is required (footnote 249) and a rear driveshaft is required (footnote 250). The listing does not name the parts, so confirm with the maker.

Will K4167M fit a gas Jeep Gladiator?

Yes, gas is what the maker lists. K4167M is for the Jeep Gladiator JT 4WD gas models, 2020 to 2026, and footnote 182 reads: Fits Gas Models Only.

What tire size does the Trail kit take?

Fabtech lists 37 in as the largest tire for K4167M. Per the maker, stock fenders take up to 35/12.50R20, and the 37/12.50R17 and R18 sizes need cutting.

What are the lower link lengths in the Trail kit?

The maker lists short-arm lower links of 1.75 in in the front and 2.0 in in the rear, both with 5 ton joints, as part of the K4167M kit parts.

Where these figures come from

Every figure above is Fabtech's own, from its spec sheets, fit charts and install guides, checked on Oct 24, 2026.

1 maker documents
  • Fabtech Motorsports, manufacturer product page (page text read with WebFetch; Fabtech public WooCommerce store API response hashed), read Oct 24, 2026
Fabtech 3-inch Trail lift kit with Stealth shocks K4167MCheck price on Amazon