FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Bed racks that fit the 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 long

9 bed racks and toolboxes fit, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' charts and install guides, with 11% of the entries taken from retailer listings where a maker publishes no chart; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 long: what to know first

Bed racks, cargo systems and toolboxes for the 2019-2025 Chevrolet Silverado 1500 long bed are covered here. The maker figures for this bed are a floor length of 98.18 in, an inside width of 71.4 in and a wheel well width of 50.63 in. Nine listings fit this bed. All 9 fit, none fits only with a condition, and none is ruled out. Six carry the Chevrolet label and three carry the GMC Sierra 1500 label, because the two trucks are platform twins. The Silverado is built as a Regular Cab, Double Cab or Crew Cab, and its factory bed list includes the Durabed with 12 tie-downs and a factory spray-in liner. Tailgate equipment named by the maker includes the Multi-Flex and a power up/down tailgate, both listed as available, plus EZ Lift power lock and release. Start with the bed length, then the part number, then the tailgate.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 00-96-FA-1516, Leitner Designs 00-8.0NDNS-1710, DECKED XG9LF, DeeZee DZ8170SB. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 00-96-FA-1516

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 00-96-FA-1516 for the 2019 to 2026 Chevrolet Silverado 1500 with an 8 ft bed.

  • Leitner ACS FORGED NDNS 00-8.0NDNS-1710

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-8.0NDNS-1710 is the Forged NDNS bed rack for the 2007 to 2026 Chevrolet 1500 with a 8 ft bed.

  • Prinsu CBI Bed Bars

    • Fits
    • Static load1,000 lb
    • Dynamic (driving) load600 lb
    No Amazon listing found

    Prinsu CBI Bed Bars for the Chevy Silverado 1500 are universal bed bars that Prinsu says are designed to fit most truck beds. The crossbar width adjusts from 51 to 70 in, and Prinsu gives no year or bed length.

  • DECKED Tool Box

    • Fits
    No Amazon listing found

    The maker's fitment chart shows Tool Box options for the 2019-current GMC Sierra 1500 and Chevy Silverado 1500 with an 8 ft bed. The Tool Box fits nearly every full-size truck from 2001 to today, but not RamBox, service bodies, the GMC CarbonPro bed, Chevy Silverado EV, Ford F-150 Heritage Edition or Nissan Titan.

  • No Amazon listing found

    DECKED lists drawer system SKU XG9LF for the 2019-current GMC Sierra 1500 or Chevy Silverado 1500 with an 8 ft bed.

  • DeeZee HARDware Series Crossover Tool Box DZ8170SB

    • Fits
    Check price on Amazon

    DeeZee lists DZ8170 for the 1999-2026 Silverado 1500 with a 8 ft bed. Confirm with the maker before ordering.

  • Leitner ACS FORGED Active Cargo System 00-96-FA-1516

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    GMC Sierra 1500 only. Leitner lists ACS FORGED part 00-96-FA-1516 for the 2019 to 2026 GMC Sierra 1500 with an 8 ft bed.

  • Leitner ACS FORGED NDNS 00-8.0NDNS-1710

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    GMC Sierra 1500 only. Leitner ACS part 00-8.0NDNS-1710 is the Forged NDNS bed rack for the 2007 to 2026 GMC 1500 with a 8 ft bed.

  • Prinsu CBI Bed Bars

    • Fits
    • Static load1,000 lb
    • Dynamic (driving) load600 lb
    No Amazon listing found

    GMC Sierra 1500 only. Prinsu says these universal bed bars are designed to fit most truck beds, and the crossbar width adjusts from 51 to 70 inches. Prinsu does not list a year or bed length.

2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 long: by the numbers

1,400 lbmedian static load across 6 bed racks and toolboxes (1,000 to 1,400 lb)
800 lbmedian dynamic load across 6 bed racks and toolboxes (600 to 800 lb)
23 inmedian height above rail across 6 bed racks and toolboxes (9.25 to 23 in)
1 of 9can be bought on Amazon today
67%of these bed racks and toolboxes publish a static load

Static load (lb): the 6 highest for this bed

Leitner ACS FORGED Active Cargo System 00-96-FA-15161,400
Leitner ACS FORGED NDNS 00-8.0NDNS-17101,400
Leitner ACS FORGED Active Cargo System 00-96-FA-15161,400
Leitner ACS FORGED NDNS 00-8.0NDNS-17101,400
Prinsu CBI Bed Bars 1,000
Prinsu CBI Bed Bars 1,000

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

The nine listings split into two groups. Six are racks or cargo systems: the Leitner ACS FORGED Active Cargo System, the Leitner ACS FORGED NDNS and the Prinsu CBI Bed Bars, each listed once under Chevrolet and once under GMC. Three are storage, all under Chevrolet: the DECKED Tool Box, the DECKED Drawer System and the DeeZee HARDware Series Crossover Tool Box. The load figures give a clear spread. The highest ratings listed are 1400 lb static and 800 lb dynamic (driving), held by both Leitner products. The lowest published ratings are 1000 lb static and 600 lb dynamic on the Prinsu bars. The Leitner ACS FORGED Active Cargo System is listed with a C-channel clamp mount. The maker does not publish a mount type for the NDNS or the Prinsu bars, and the three storage products carry no load rating at all. Prinsu states the crossbar width adjusts from 51 to 70 in and does not list a year or bed length, so compare that range with the 71.4 in inside width and 50.63 in wheel well width above. For the factory options, the Sierra Denali CarbonPro Edition has a CarbonPro bed, and DECKED says its Tool Box does not fit that bed. No maker attaches a tailgate condition to any of these.

Watch-outs before you buy

None of these is ruled out or fits only with a condition, so the care goes into the details. Three listings carry the GMC Sierra 1500 label and repeat the Chevrolet part numbers for the two Leitner products, 00-96-FA-1516 and 00-8.0NDNS-1710. The DeeZee DZ8170SB fitment comes from a search summary rather than the maker's own page, because the maker's page blocked direct access, so confirm it with the maker before ordering. DECKED's guide gives "See Options" for the Tool Box instead of one part number. DECKED says the Tool Box does not fit RamBox, service bodies, the GMC CarbonPro bed, the Chevy Silverado EV, the Ford F-150 Heritage Edition or the Nissan Titan. Before you buy, confirm the long bed, match the part number on the Amazon listing, and check your tailgate type.

What on the 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 decides fit

The 2019-2026 GMC Sierra 1500 shares the 2019-2026 Chevrolet Silverado 1500's platform and bed, so the makers list them together. Where a maker treats the twins differently, the note beside the product says which truck it means.

Chevrolet Silverado 1500 bed to scale Floor length 98.18 in, inside width 71.4 in, 50.63 in between the wheel wells. floor length 98.18 in width 71.4 in 50.63 in between wells cab side tailgate
Drawing from the manufacturer's published dimensions: Floor length 98.18 in, inside width 71.4 in, 50.63 in between the wheel wells.

2019-2026 Chevrolet Silverado 1500

3beds offered: Short Bed (69.92 in), Standard Bed (79.44 in), Long Bed (98.18 in)
3tailgate systems: Multi-Flex (available), EZ Lift power lock and release, power up/down tailgate (available)
2factory bed systems: Durabed (12 tie-downs), factory spray-in (Spray On Bedliner on Special Editions)
3cab styles: Regular Cab, Double Cab, Crew Cab

2019-2026 GMC Sierra 1500

3beds offered: Short Bed (69.92 in), Standard Bed (79.44 in), Long Bed (98.2 in)
1tailgate system: MultiPro (standard on Elevation, AT4, Denali, AT4X, Denali Ultimate per MY2027 page; available on others per 2024 brochure)
2factory bed systems: CarbonPro carbon-fiber composite bed (Denali CarbonPro Edition, 2024 brochure), factory spray-in (spray-on bedliner with logo, 2024 brochure)
3cab styles: Regular Cab, Double Cab, Crew Cab

9 of the 11 bed racks and toolboxes made for the short are also made for this one, with a different part number for each bed length. 9 of the 11 bed racks and toolboxes made for the standard are also made for this one, with a different part number for each bed length.

Before you buy racks and toolboxes for a Chevrolet Silverado 1500

Questions owners ask

What bed rack fits a 2019-2025 Silverado 1500 long bed?

The maker lists the Leitner ACS FORGED Active Cargo System, part number 00-96-FA-1516, for the Chevrolet 1500 2019-2026 8-0 bed. It uses a C-channel clamp and is rated 1400 lb static and 800 lb dynamic.

How much weight can a Silverado long bed rack carry?

The highest ratings listed are 1400 lb static and 800 lb dynamic, on both Leitner products. The Prinsu CBI Bed Bars are listed at 1000 lb static and 600 lb dynamic. The toolbox and drawer products give no load rating.

What is the DECKED drawer system part number for the Silverado 1500 long bed?

DECKED lists drawer system SKU XG9LF in its fitment guide for the GMC/Chevy 1500 (2019-current) 8 ft bed. The guide gives no part number for the Tool Box, only the words "See Options".

Does the DECKED Tool Box fit a Silverado with the CarbonPro bed or a Silverado EV?

No. DECKED states the Tool Box does not fit the GMC CarbonPro bed or the Chevy Silverado EV. It also excludes RamBox, service bodies, the Ford F-150 Heritage Edition and the Nissan Titan.

Do the same racks fit a GMC Sierra 1500 long bed?

The maker lists the same part numbers for the Sierra 1500: 00-96-FA-1516 for the Leitner ACS FORGED Active Cargo System and 00-8.0NDNS-1710 for the NDNS. The Prinsu bars are also listed under the Sierra name.

How long is the Silverado 1500 long bed?

The maker figure for the Silverado 1500 long bed is a floor length of 98.18 in. Inside width is 71.4 in and wheel well width is 50.63 in. The short bed is 69.92 in and the standard bed is 79.44 in.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

5 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026
  • DeeZee, manufacturer product page (HTML) not fetched directly: Cloudflare 403; values read from a search-engine extract of the page, read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
DeeZee HARDware Series Crossover Tool Box DZ8170SBCheck price on Amazon