FitsMyTruckWhat fits your pickup, by truck and bed

HRG Offroad 1.5 Inch Lift Kit

A lift kit from HRG Offroad: 1.5 in front lift. HRG Offroad makes it for 1 truck generation, each with its own part number and conditions.

By the FitsMyTruck team. Figures come from HRG Offroad's own spec sheets and fit charts, part numbers are checked against the live listings, and the page is reviewed before it goes up. Last reviewed Oct 24, 2026.

The HRG Offroad 1.5 Inch Lift Kit in brief

The Honda Ridgeline gets a modest lift from HRG Offroad in a single kit, part number HRG-RID1727LK-1.0. It is a spacer lift, so it reuses the factory shocks and adds 1.5 in of front lift and 1 in of rear lift. The maker lists it for the 2017-2027 Ridgeline, in 2WD and 4WD, and names all trims. The kit includes new sway bar end links. The maker says the offset spacers maintain factory rake. The largest tire the maker lists is 30 in, and the maker writes that figure as a tire note about compatibility with wheel spacers, so it should not be read as a tire rating. The maker's install estimate is about 3 hours. It is the only part number in the HRG Offroad line, so there is no variant to choose between.

spacer liftKit type
1.5 inFront lift
1 inRear lift
reuses factoryShocks included or required

Specifications from the maker

spacer liftKit type
1.5 inFront lift
1 inRear lift
reuses factoryShocks included or required. inferred: kit lists spacers and links only
30 inLargest tire the maker lists
2WD and 4WDDrive fitment. page lists all trims and does not separate FWD from AWD
not publishedAlignment and driveline notes. not published

Which part number is yours

With one part number, the job is confirming the match rather than choosing among options. The maker lists 2017-2027 Ridgeline and names all trims, but its listing does not separate FWD from AWD, so the kit is listed for 2WD and 4WD. Confirm HRG-RID1727LK-1.0 on the listing, including the .0 at the end. The maker describes 1.5 in front and 1.0 in rear spacers. A rear-high option uses 1.5 in rear spacers for heavy loads; no separate part number is listed for it, so ask the maker or check the listing before assuming it is included. The kit contains spacers and links only, and it reuses the factory shocks, so there are no shock parts to match. The maker does not say which Ridgeline trims suit the rear-high option.

Trucks it fits

  • 2017-2026 Honda Ridgeline

    • Fits, HRG-RID1727LK-1.0

    HRG Offroad HRG-RID1727LK-1.0 fits 2WD and 4WD Ridgelines in every trim and is listed for 2017-2027, without separating FWD from AWD. It has 1.5 in front and 1.0 in rear spacers (the rear-high option uses 1.5 in rear spacers for heavy loads) and new sway bar end links, and the offset spacers maintain the factory rake. Install takes about 3 hours, and HRG's 30 in tire figure refers to compatibility with wheel spacers.

    All lift and leveling kits for this truck

Before you buy a lift kit

Questions owners ask

How much lift does the HRG Ridgeline kit give?

The maker lists 1.5 in in front and 1 in in the rear. A rear-high option uses 1.5 in rear spacers for heavy loads. It is a spacer lift that reuses the factory shocks.

Which Ridgeline years does the kit fit?

The maker lists HRG-RID1727LK-1.0 for the 2017-2027 Honda Ridgeline and names all trims. Its listing does not separate FWD from AWD, so check your drivetrain on the listing before you order.

What is the largest tire for this kit?

The maker lists 30 in. That figure comes from the maker's tire note about wheel spacer compatibility, so treat it as the maker's note and not as a rating.

How long does the install take?

The maker gives about 3 hours for the install. The kit includes new sway bar end links, and the maker says the offset spacers maintain factory rake.

Where these figures come from

Every figure above is HRG Offroad's own, from its spec sheets, fit charts and install guides, checked on Oct 24, 2026.

1 maker documents
  • HRG Offroad, manufacturer product page (HRG Offroad storefront, read in the built-in browser pane), read Oct 24, 2026