FitsMyTruckWhat fits your pickup, by truck and bed

We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.

Bed racks that fit the 2019-2026 Ram 1500 5.58 ft bed

8 bed racks and toolboxes fit, by the makers' own fit charts.

By the FitsMyTruck team. Fit answers come from the makers' charts and install guides, with 13% of the entries taken from retailer listings where a maker publishes no chart; part numbers are checked against the live listings, and every page is reviewed before it goes up. Last reviewed Oct 24, 2026.

Racks and toolboxes for the 2019-2026 Ram 1500 5.58 ft bed: what to know first

Eight bed rack and toolbox listings cover the 2019-2025 Ram 1500 with the 5 ft 7 in bed, and all eight fit. None fits only under a condition and none is ruled out. The maker figure for this bed is a floor length of 67.4 in, a nominal 5.58 ft. The same generation also comes with a 6 ft 4 in bed at 76.3 in, so confirm which bed you have before opening any listing. Cab styles are Quad Cab and Crew Cab. Two factory options deserve attention on this truck: the Ram multifunction tailgate and the RamBox cargo management system, both listed as available. The tailgate rules out one Leitner rack. The RamBox changes which DECKED drawer you buy and rules out the DECKED Tool Box. Inside width and wheel well width are not published for this bed.

Every bed rack or toolbox made for this bed

Part numbers for this bed: Leitner Designs 00-64-FA-1309, Leitner Designs 00-5.6NSA-1594, Leitner Designs 00-56-FTA-1376, DECKED XR6, DECKED XR8, DeeZee DZ8170SB. Match the part number on the listing before you order.

  • Leitner ACS FORGED Active Cargo System 00-64-FA-1309

    • Fits
    • Mount typeC-channel clamp
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner lists ACS FORGED part 00-64-FA-1309 for the 2009 to 2026 Ram 1500 with a 5 ft 7 in bed.

  • Leitner ACS FORGED NDNS 00-5.6NSA-1594

    • Fits
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-5.6NSA-1594 is the Forged NDNS bed rack for the 2009 to 2026 Ram 1500 with a 5 ft 7 in bed.

  • Leitner ACS FORGED TONNEAU rack only 00-56-FTA-1376

    • Fits
    • Mount typeT-slot bed rail
    • Static load1,400 lb
    • Dynamic (driving) load800 lb
    No Amazon listing found

    Leitner ACS part 00-56-FTA-1376 is the Forged Tonneau rack (rack only, no cover) for the 2019 to 2026 Ram 1500 with a 5 ft 7 in bed. Leitner says it will not work with the Multifunction Tailgate.

  • Prinsu CBI Bed Bars

    • Fits
    • Static load1,000 lb
    • Dynamic (driving) load600 lb
    No Amazon listing found

    Prinsu says these universal bed bars are designed to fit most truck beds, and the crossbar width adjusts from 51 to 70 inches. Prinsu does not list a year or bed length.

  • DECKED Tool Box

    • Fits
    No Amazon listing found

    The maker's fitment chart shows Tool Box options for the 2019-current Ram 1500 with a 5 ft 7 in bed. The Tool Box fits nearly every full-size truck from 2001 to today, but not RamBox, service bodies, the GMC CarbonPro bed, Chevy Silverado EV, Ford F-150 Heritage Edition or Nissan Titan. The chart shows the Tool Box as not available on RamBox trucks.

  • Check price on Amazon

    DECKED lists drawer system SKU XR6 for the 2019-current Ram 1500 with a 5 ft 7 in bed.

  • Check price on Amazon

    DECKED lists drawer system SKU XR8 for the 2009-current RamBox Ram 1500 with a 5 ft 7 in bed. It is the RamBox-specific SKU, and CargoGlide and Tool Box are not available for RamBox.

  • DeeZee HARDware Series Crossover Tool Box DZ8170SB

    • Fits
    Check price on Amazon

    DeeZee lists DZ8170 for the 2013-2026 Ram 1500 with a 5.5 ft bed. Confirm with the maker before ordering.

2019-2026 Ram 1500 5.58 ft bed: by the numbers

1,400 lbmedian static load across 4 bed racks and toolboxes (1,000 to 1,400 lb)
800 lbmedian dynamic load across 4 bed racks and toolboxes (600 to 800 lb)
23 inmedian height above rail across 4 bed racks and toolboxes (9.25 to 23 in)
13%are C-channel clamp, the most common type here
3 of 8can be bought on Amazon today
50%of these bed racks and toolboxes publish a static load

Static load (lb): the 4 highest for this bed

Leitner ACS FORGED Active Cargo System 00-64-FA-13091,400
Leitner ACS FORGED NDNS 00-5.6NSA-15941,400
Leitner ACS FORGED TONNEAU rack only 00-56-FTA-13761,400
Prinsu CBI Bed Bars 1,000

Figures are the makers' own. A bed rack or toolbox with no published figure is left out.

How to choose for this bed

Four of the eight listings are racks and four are storage. The racks are three Leitner ACS FORGED products and the Prinsu CBI Bed Bars. The Leitner set is the Active Cargo System (00-64-FA-1309, C-channel clamp), the NDNS (00-5.6NSA-1594) and the TONNEAU rack only (00-56-FTA-1376, T-slot bed rail). The storage side is the DECKED Tool Box, two DECKED Drawer System SKUs (XR6 and XR8) and the DeeZee HARDware Series Crossover Tool Box. All three Leitner products carry the highest ratings listed here, 1400 lb static and 800 lb dynamic (driving). The Prinsu bars sit lower at 1000 lb static and 600 lb dynamic, and their crossbar width adjusts from 51 to 70 in. The storage listings publish no load rating. Your factory options settle the rest. With a Ram multifunction tailgate, the maker says the TONNEAU rack only will not work. The remote power tailgate control is listed as available but not together with the multifunction tailgate. With RamBox, DECKED shows the Tool Box as N/A and points to drawer system XR8 instead of XR6, which is the one for a truck without RamBox.

Watch-outs before you buy

All eight fit, but the Leitner TONNEAU rack only (00-56-FTA-1376) carries a maker exclusion for the Multifunction Tailgate, so read that part number against your tailgate. DECKED sells two drawer SKUs for this bed: XR6 for a truck without RamBox and XR8, which the maker marks as RamBox-specific. The DECKED Tool Box does not fit RamBox, and its guide column for that bed reads "See Options". The DeeZee DZ8170SB is listed for a 5.5 ft Ram 1500 bed from 2013 to 2026, and that listing comes from a search summary rather than DeeZee's own page, so confirm it with DeeZee before ordering. Check the bed length, the RamBox question and the tailgate before you pay.

What on the 2019-2026 Ram 1500 decides fit

Bed dimensions for this generation are not published by the manufacturer; the fit rows below rely on the maker's bed codes.

2beds offered: 5.58 ft (67.4 in), 6.33 ft (76.3 in)
2tailgate systems: Ram multifunction tailgate (referenced as an available option), remote power tailgate control (available; not with the multifunction tailgate)
1factory bed system: RamBox cargo management system (available)
2cab styles: Quad Cab, Crew Cab

8 of the 10 bed racks and toolboxes made for the 6.33 ft bed are also made for this one, with a different part number for each bed length.

Before you buy racks and toolboxes for a Ram 1500

Questions owners ask

What bed rack fits a 2019-2025 Ram 1500 with the 5 ft 7 in bed?

The maker lists the Leitner ACS FORGED Active Cargo System, part number 00-64-FA-1309, for the RAM 1500 2009-2026 5-7 bed. It has a C-channel clamp and is rated 1400 lb static and 800 lb dynamic.

Does the Ram multifunction tailgate affect which bed rack I can buy?

Yes for one rack. The Leitner ACS FORGED TONNEAU rack only, part number 00-56-FTA-1376, is listed by the maker as one that will not work with the Multifunction Tailgate. The other Leitner listings carry no such note.

Which DECKED drawer system fits a Ram 1500 5 ft 7 in bed?

DECKED lists SKU XR6 for the RAM 1500 (2019-current) 5 ft 7 in bed. If your truck has RamBox, the guide lists SKU XR8 instead, and it shows the Tool Box and CargoGlide as N/A for RamBox.

Does the DECKED Tool Box fit a Ram 1500 with RamBox?

No. DECKED states the Tool Box does not fit RamBox, and its fitment guide shows the Tool Box as N/A on RamBox trucks. For a non-RamBox 5 ft 7 in bed, the Tool Box column reads "See Options".

How much can a Ram 1500 bed rack hold?

The highest ratings are 1400 lb static and 800 lb dynamic, shared by the three Leitner products. The Prinsu CBI Bed Bars are listed at 1000 lb static and 600 lb dynamic.

How long is the Ram 1500 5 ft 7 in bed?

The maker figure for this bed is a floor length of 67.4 in, a nominal 5.58 ft. The longer 6 ft 4 in bed on the same truck measures 76.3 in. Inside width and wheel well width are not published.

Where these fits come from

Every fit above comes from a maker fit chart, spec sheet or install guide, read and checked on Oct 24, 2026. Spotted something a maker has since changed? Tell us.

4 maker documents
  • Leitner Designs, manufacturer product catalog (Shopify products.json: description, variants make/model/year/bed/part), read Oct 24, 2026
  • Prinsu, manufacturer product page (HTML), read Oct 24, 2026
  • DECKED, manufacturer fitment guide (HTML table), read Oct 24, 2026
  • DeeZee, manufacturer product page (HTML) not fetched directly: Cloudflare 403; values read from a search-engine extract of the page, read Oct 24, 2026
DECKED Drawer System XR6Check price on Amazon