We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
4 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1.5 to 6 inches.
Nissan builds the 2022-2026 Frontier as a King Cab and a Crew Cab, with three beds: the Crew Cab Standard Bed at 59.5 in of floor length, the King Cab bed at 73.3 in and the Crew Cab Long Bed (6-ft) at 73.3 in. Rough Country makes all 4 lift and leveling kits listed for it, and it lists all 4 as fitting. None needs a condition or is ruled out, although the maker text for every one of them names a trim or model it leaves out. The part numbers are 82014, 865, 867 and 83730. Bed hardware varies by grade. The Utili-track system with adjustable tie-down cleats is standard on the Crew Cab SL and optional on most, and the factory spray-in is optional on most grades and standard on the Crew Cab SL. The tailgate locks and has dampened opening and closure assist.
6 in
Kit type: full suspension liftFront lift: 6 inRear lift: not published
Fits Rough Country 83730 (83731 with N3 struts) fits the 2022-2026 Frontier 2WD and 4WD. The kit has lifted knuckles, crossmembers, sway bar relocation brackets, ...
Check price on Amazon2.5 in tied with 1 other
Kit type: leveling kitFront lift: 2.5 inRear lift: 0 in
Fits Rough Country 865 (red spacer version 865RED) has billet aluminum strut extensions, so the struts do not need to be taken apart. It fits the 2005-2026 Fronti...
Check price on AmazonRough Country 82014 is a set of strut spacers for the 2022-2026 Frontier 4WD, designed to fit PRO-4X models only. Install time is 2-3 hours.
Rough Country 865 (red spacer version 865RED) has billet aluminum strut extensions, so the struts do not need to be taken apart. It fits the 2005-2026 Frontier 4WD and RWD, but not PRO-4X, Desert Runner or international models. Install time is 2-4 hours.
Rough Country 867 (variants 867RED, 86731 with N3 struts and 86740 with M1 struts) has front strut extensions and 1.5 in lifted rear shackles. It fits the 2005-2026 Frontier 2WD and 4WD, and the lifted strut options are for Frontier 4WD only because of the coil spring rate. It does not fit Desert Runner or international models. Install time is 2-4 hours.
Rough Country 83730 (83731 with N3 struts) fits the 2022-2026 Frontier 2WD and 4WD. The kit has lifted knuckles, crossmembers, sway bar relocation brackets, a skid plate, fabricated rear lift blocks and two Premium N3 shocks, and it needs minor drilling and cutting. The strut spacer version 83730 does not fit PRO-4X, while the lifted strut version 83731 fits PRO-4X and is 4WD only. It does not work with factory wheels and needs aftermarket wheels 18 in or larger with 5 in backspacing. Install time is 6-8 hours.
The 4 kits are 2 leveling kits, 1 spacer lift and 1 full suspension lift, all from Rough Country. The lowest front lift is 1.5 in, from the 82014 strut spacers. The 865 strut extensions and the 867 kit both give 2.5 in up front, and the 867 adds 1.5 in lifted rear shackles. The highest is the 6 inch 83730, which includes two Premium N3 shocks and uses lifted knuckles, crossmembers, sway-bar relocation brackets, a skid plate and fabricated rear lift blocks. Rough Country states no largest tire for any of the four, and no rear lift figure for the 83730. Trim decides the choice. The 82014 is designed exclusively for PRO-4X models, while the 865 does not fit PRO-4X or Desert Runner. For the 83730, the strut spacer version does not fit PRO-4X, and the 83731 lifted strut version does and is 4WD only. Drive splits the list: the 82014 is 4WD only, and the 865, 867 and 83730 list 2WD and 4WD. Install times run from 2 to 3 hours for the 82014 up to 6 to 8 hours for the 83730.
No kit is ruled out, so read the exclusions. The 865 and 867 list years from 2005 to 2026, so confirm the listing you buy covers a 2022 or later truck. Rough Country says the 865 and 867 do not fit Desert Runner and do not work on international models. The 83730 needs minor drilling and cutting, does not work with factory wheels and needs 18 in or larger aftermarket wheels with 5 in backspacing. Lifted strut options on the 867 are for 4WD only because of the coil spring rate. Variants carry their own part numbers: 865RED, 867RED, 86731 with N3 struts, 86740 with M1 struts and 83731 with N3 struts. Rough Country does not split any kit by King Cab or Crew Cab, so check the cab and trim on the listing.
3 of the 5 lift and leveling kits made for the 2005-2021 Nissan Frontier are also made for this truck.
Rough Country says the 82014 is designed exclusively for PRO-4X models. It is a 1.5 in leveling kit of strut spacers, 4WD only, with a 2 to 3 hour install. The 83731 lifted strut version of the 6 inch kit also fits PRO-4X and is 4WD only.
Rough Country lists the 865 for Frontier 4WD and RWD, with 2.5 in up front. It does not fit PRO-4X or Desert Runner. The 867 and 83730 also list 2WD and 4WD, but their lifted strut options are 4WD only.
Rough Country says the 83730 does not work with factory wheels. It calls for 18 in or larger aftermarket wheels with 5 in backspacing. The kit needs minor drilling and cutting, and the maker gives an install time of 6 to 8 hours.
Rough Country gives 2 to 3 hours for the 82014, 2 to 4 hours for the 865 and the 867, and 6 to 8 hours for the 83730. These are the maker's own figures.
Only the 83730 includes shocks, two Premium N3 shocks. The 82014, 865 and 867 reuse the factory shocks. N3 and M1 strut variants are sold under separate part numbers: 86731, 86740 and 83731.