We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
13 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1.5 to 7 inches.
The makers list 13 lift and leveling kits for the 2020-2026 Chevrolet Silverado 2500 HD, and all 13 fit, with none ruled out by its maker. The truck comes as a Regular Cab, Double Cab or Crew Cab, with a Standard Bed that has an 82.25 in floor length and a Long Bed at 98.27 in. Rough Country makes 6 of the kits, Zone Offroad Products 5 and Fabtech 2. Eleven are full suspension lifts and two are leveling kits. Front lift runs from 1.5 in to 7 in. Eight kits list 2WD and 4WD and five list 4WD only. Several makers write their fitment as 2500/3500HD, and Fabtech names the Sierra 2500HD, so the same part numbers serve the GMC truck as well.
7 in
Kit type: full suspension liftFront lift: 7 inRear lift: not published
Fits Rough Country 10130A (M1 10140, V2 10170) fits 2WD and 4WD trucks, is listed for 2020-2026, and retains stock track width. It has lifted knuckles, crossmembe...
Check price on Amazon37 in tied with 1 other
Kit type: full suspension liftFront lift: 5 inRear lift: 4.5 in
Fits Zone's 5 inch lift kit fits 4WD Silverado and Sierra 2500HD trucks from 2020 to 2026, and Zone describes it as fitting 2500HD and 3500HD. This version is for...
Check price on Amazon1.5 in
Kit type: leveling kitFront lift: 1.5 inRear lift: 0 in
Fits Rough Country 9594 (N3 959430, M1 959440) fits 2WD and 4WD trucks and is listed for 2020-2026, Silverado 2500 HD and 3500 HD 4WD and RWD. It is sold as a 1.5...
Check price on AmazonRough Country 9594 (N3 959430, M1 959440) fits 2WD and 4WD trucks and is listed for 2020-2026, Silverado 2500 HD and 3500 HD 4WD and RWD. It is sold as a 1.5-2 inch kit with forged torsion bar adjuster keys and shock extension sleeves. It does not fit the AT4X or ZR2 (1.5 in factory lift, Multimatic DSSV dampers), and install takes 2-3 hours.
Rough Country 95830 (UCA M1 95840, V2 95870) fits 2WD and 4WD trucks and is listed for 2020-2026. It has torsion bar adjuster keys, forged aluminum upper control arms, differential spacers, rear lift blocks with U-bolts and four Premium N3 shocks. It does not fit dually models, the AT4X or the ZR2, and install takes 4-6 hours.
Rough Country 10230A (M1 10240, V2 10270) fits 2WD and 4WD trucks, is listed for 2020-2026, and retains stock track width. It has lifted knuckles, crossmembers, differential drop brackets, non-torsion bar drop brackets, lift blocks and four Premium N3 shocks. It does not work with factory wheels, it does not fit dually models, the AT4X or the ZR2, gas models may need exhaust modification for driveshaft clearance, and install takes 8-10 hours.
Rough Country 11030 (M1 11040, V2 11070) fits 2WD and 4WD trucks and is listed for 2020-2026. It has lifted knuckles, crossmembers, torsion bar drop brackets, lift blocks and four Premium N3 shocks. It does not work with factory wheels, it does not fit dually models, the AT4X or the ZR2, gas models may need exhaust modification for driveshaft clearance, and install takes 8-10 hours.
Rough Country 10130A (M1 10140, V2 10170) fits 2WD and 4WD trucks, is listed for 2020-2026, and retains stock track width. It has lifted knuckles, crossmembers, non-torsion bar drop brackets, anti-wrap lift blocks and four Premium N3 shocks. It does not work with factory wheels, it does not fit dually models, the AT4X or the ZR2, gas models may need exhaust modification for driveshaft clearance, and install takes 8-10 hours.
Rough Country 11730 (M1 11740, V2 11770) fits 2WD and 4WD trucks and is listed for 2020-2026. It has lifted knuckles, crossmembers, torsion bar drop brackets, lift blocks and four Premium N3 shocks. It does not fit dually models, the AT4X or the ZR2, gas models may need exhaust modification for driveshaft clearance, and install takes 8-10 hours.
Fabtech K1157M fits 2WD and 4WD trucks and is listed for 2020-2026, Silverado 2500HD and Sierra 2500HD (model code K2500HD). You cannot use the factory wheel and tire with it, and it does not fit standard cab models.
Fabtech K1159 fits 2WD and 4WD trucks and is listed for 2020-2026. You cannot use the factory wheel and tire with it, it does not fit standard cab models, and Fabtech's footnote 167 says diesel models only without saying which part it applies to, so confirm gas fitment with the maker. Uniball upper control arms are a separate option (FTS21283).
Zone's 2 inch leveling kit fits 4WD Silverado and Sierra 2500HD and 3500HD trucks. Zone lists 2020 to 2025 models.
Zone's 3 inch lift kit fits 4WD Silverado and Sierra 2500HD trucks from 2020 to 2026, and Zone describes it as fitting 2500HD and 3500HD. This version is for trucks without the factory overload and uses the FOX 2.0 Adventure Series.
Zone's 3 inch lift kit fits 4WD Silverado and Sierra 2500HD trucks from 2020 to 2026, and Zone describes it as fitting 2500HD and 3500HD. This version is for trucks with the factory overload and uses the FOX 2.0 Adventure Series.
Zone's 5 inch lift kit fits 4WD Silverado and Sierra 2500HD trucks from 2020 to 2026, and Zone describes it as fitting 2500HD and 3500HD. This version is for trucks without the factory overload and uses the FOX 2.0 Adventure Series.
Zone's 5 inch lift kit fits 4WD Silverado and Sierra 2500HD trucks from 2020 to 2026, and Zone describes it as fitting 2500HD and 3500HD. This version is for trucks with the factory overload and uses the FOX 2.0 Adventure Series.
Two products are leveling kits. Rough Country 9594 lists 1.5 in at the front, carries a maker title of 1.5-2 inch and works through torsion bar adjuster keys and shock extension sleeves. Zone ZONC1231 is a 2 in kit that reuses the factory shocks. The lifts begin at 3 in (Rough Country 95830, Zone ZONC48F and ZONC49F) and 3.5 in (Fabtech K1157M), then step to 5 in (Rough Country 10230A and 11030, Zone ZONC43F and ZONC50F), 6 in (Fabtech K1159) and 7 in (Rough Country 10130A and 11730). Zone is the only maker here that states a rear lift, at 2 in on its 3-inch kits and 4.5 in on its 5-inch kits. The largest tire is 37 in on K1159, ZONC43F and ZONC50F, and 35 in on K1157M, ZONC1231, ZONC48F and ZONC49F. The six Rough Country kits state none. Zone sells each size With Factory Overload and Without Factory Overload, so match that to your truck. Rough Country lists 2-3 hours to install 9594, 4-6 hours for 95830 and 8-10 hours for the 5-inch and 7-inch kits.
All 13 kits fit, but the exclusions are specific. The six Rough Country kits do not fit the AT4X or ZR2, which carry a 1.5 in factory lift and Multimatic DSSV dampers, and five of them do not fit a dually. Both Fabtech kits, K1157M and K1159, do not fit standard cab models and cannot use the OEM wheel and tire. K1159 carries a diesel only footnote that does not say which part it applies to, so confirm gas fitment with the maker. Four Rough Country lifts note that gas models may need an exhaust modification for driveshaft clearance. Rough Country 10130A, 10230A and 11030 do not work with factory wheels.
The makers list 13 kits: 11 full suspension lifts and 2 leveling kits, from Rough Country, Zone Offroad Products and Fabtech. Front lift runs from 1.5 in to 7 in.
The six Rough Country kits say they do not fit the AT4X or ZR2, which have a 1.5 in factory lift and Multimatic DSSV dampers. Check the Zone and Fabtech footnotes on the exact part number.
No. Fabtech K1157M and K1159 both say they do not fit standard cab models. The Double Cab and Crew Cab are the cab styles to check against.
Rough Country 10130A and 11730 list 7 in at the front, and Rough Country lists 8-10 hours to install them. Gas models may need an exhaust modification for driveshaft clearance.
Five Rough Country kits, 95830, 10230A, 11030, 10130A and 11730, say they do not fit a dually. The Zone and Fabtech listings carry no dually note.