We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
15 lift and leveling kits fit, by the makers' own fit charts. Front lift ranges from 1 to 6 inches.
Chevrolet Colorado and GMC Canyon owners share this list, because the 2023-2026 twins have the same 61.7 in box floor length. Nine lift and leveling kits fit, and the makers rule none of them out. Rough Country supplies four part numbers (13000, 13100, 13230 and 13330) and Zone Offroad Products supplies five (ZONC1242, ZONC1240, ZONC85, ZONC84F and ZONC84N). The maker listings run 2023-2026. The makers describe fitment by trim. Rough Country leaves out the ZR2 and AT4X, which it says carry a 3 in factory lift and Multimatic DSSV dampers, while Zone writes kits for those trims and for the Trail Boss and AT4.
6 in
Kit type: full suspension liftFront lift: 6 inRear lift: not published
Fits Rough Country 13330 (13331 with N3 struts, 13340 with M1 struts) is for 4WD only and is listed for 2023-2026. The kit has lifted knuckles, strut spacers, cro...
Check price on Amazon35 in tied with 3 others
Kit type: full suspension liftFront lift: 3 inRear lift: 2 in
Fits This 3 inch lift kit fits 4WD Colorado Trail Boss and Canyon AT4 trucks from 2023 to 2026, according to Zone. It is the FOX Adventure Series version, and onl...
Check price on Amazon1 in tied with 2 others
Kit type: leveling kitFront lift: 1 inRear lift: 0 in
Fits Rough Country 13000 is an easy-to-reverse strut spacer kit for the Colorado 2023-2026 4WD and 2024-2026 RWD, and the Canyon 2024-2026 4WD. It does not fit ZR...
Check price on AmazonRough Country 13000 is an easy-to-reverse strut spacer kit for the Colorado 2023-2026 4WD and 2024-2026 RWD, and the Canyon 2024-2026 4WD. It does not fit ZR2 or AT4X models, which have a 3 in factory lift and Multimatic DSSV dampers. Install time is 1-2 hours.
Rough Country 13100 has front strut spacers and preload spacers plus rear lift blocks with U-bolts, and it eliminates the factory rake. It fits the Colorado 2023-2026 4WD and RWD and the Canyon 2024-2026 4WD. It does not fit ZR2 or AT4X models. Install time is 3-4 hours.
Rough Country 13230 (13231 with N3 struts) is for 4WD only and is listed for 2023-2026. The kit has lifted knuckles, strut spacers, crossmembers, differential drop brackets, a skid plate, rear lift blocks and two Premium N3 shocks. It needs aftermarket 20 in wheels because the lift knuckles correct the tie rod angle and factory wheels are not compatible, it does not fit the ZR2 or AT4X, and install takes 8-10 hours.
Rough Country 13330 (13331 with N3 struts, 13340 with M1 struts) is for 4WD only and is listed for 2023-2026. The kit has lifted knuckles, strut spacers, crossmembers, differential drop brackets, a skid plate, rear lift blocks and two Premium N3 shocks. It needs aftermarket 20 in wheels, it does not fit the ZR2 or AT4X, and install takes 8-10 hours.
Zone ZONC1242 is a 1 inch leveling kit for 4WD 2023-2026 Chevy Colorado ZR2 and GMC Canyon AT4X trucks. It fits those two trims only.
Zone's 2 inch lift kit fits 4WD Colorado ZR2 and Canyon AT4X trucks from 2023 to 2026. Only those two trims fit.
Zone's 3 inch lift kit fits 4WD Colorado ZR2 and Canyon AT4X trucks from 2023 to 2026. Only those two trims fit.
This 3 inch lift kit fits 4WD Colorado Trail Boss and Canyon AT4 trucks from 2023 to 2026, according to Zone. It is the FOX Adventure Series version, and only those two trims fit.
This 3 inch lift kit fits 4WD Colorado Trail Boss and Canyon AT4 trucks from 2023 to 2026, according to Zone. It is the Nitro Series version, and only those two trims fit.
GMC Canyon only. Rough Country 13100 fits 2WD and 4WD trucks, is listed for 2023-2026, and adds front strut spacers, preload spacers and rear lift blocks with U-bolts to remove the factory rake. It fits Colorado 2023-2026 4WD and RWD and Canyon 2024-2026 4WD, but not the ZR2 or AT4X. Install takes 3-4 hours.
GMC Canyon only. Zone's 1 inch leveling kit fits 4WD Colorado ZR2 and Canyon AT4X trucks from 2023 to 2026. Only those two trims fit.
GMC Canyon only. For 4WD Canyon AT4X and Colorado ZR2 trucks from 2023 to 2026, Zone lists this 2 inch lift kit. Other trims do not fit.
GMC Canyon only. For 4WD Canyon AT4X and Colorado ZR2 trucks from 2023 to 2026, Zone lists this 3 inch lift kit. Other trims do not fit.
GMC Canyon only. Zone lists this 3 inch lift kit for 4WD Canyon AT4 and Colorado Trail Boss trucks from 2023 to 2026. It is the FOX Adventure Series version, and other trims do not fit.
GMC Canyon only. Zone lists this 3 inch lift kit for 4WD Canyon AT4 and Colorado Trail Boss trucks from 2023 to 2026. It is the Nitro Series version, and other trims do not fit.
The 9 kits are 2 leveling kits, 2 spacer lifts and 5 full suspension lifts. Front lift runs from 1 in to 6 in. The low end is the Rough Country 13000 strut spacers and the Zone ZONC1242, both 1 in. The Rough Country 13100 and the Zone ZONC1240 give 2 in, and the ZONC1240 adds 1 in at the rear. The Rough Country 13230 gives 4 in and the 13330 gives 6 in, the highest here; both are 4WD only, include two Premium N3 shocks and list no rear figure. The three Zone 3 inch kits (ZONC85, ZONC84F, ZONC84N) give 3 in front and 2 in rear, and they are the only kits with a tire figure, a largest tire of 35 in. Trim sorts the list. For a ZR2 or AT4X, the choices are ZONC1242, ZONC1240 and ZONC85. For a Trail Boss or Canyon AT4, the choices are ZONC84F and ZONC84N. Rough Country says none of its four fit the ZR2 or AT4X. Only the 13000 and 13100 list 2WD and 4WD; the rest are 4WD only.
The makers rule out none of these kits, but their notes set limits. The Rough Country 13230 and 13330 require aftermarket 20 in wheels, because the lifted knuckles correct the tie rod angle and factory wheels are not compatible, and both take 8 to 10 hours to install. Rough Country's fitment for the 13000 and 13100 lists the Canyon for 2024-2026 4WD, not 2023, so a 2023 Canyon owner should confirm with the maker. Rough Country's text for the 13230 and 13330 does not name the Canyon at all. The Zone kits are trim-specific: ZR2 and AT4X only, or Trail Boss and AT4 only. Confirm trim, drive and part number before buying.
The 2023-2026 GMC Canyon shares the 2023-2026 Chevrolet Colorado's platform and bed, so the makers list them together. Where a maker treats the twins differently, the note beside the product says which truck it means.
Zone Offroad lists three for the ZR2 and Canyon AT4X: ZONC1242 at 1 in, ZONC1240 at 2 in and ZONC85 at 3 in, all 4WD only. Rough Country says its kits do not fit the ZR2 or AT4X, which have a 3 in factory lift.
Rough Country lists the Canyon for the 13000 and 13100 at 2024-2026 4WD. Zone names the Canyon AT4X with its ZR2 kits and the Canyon AT4 with the Trail Boss kits, ZONC84F and ZONC84N, for 2023-2026.
No. Rough Country says the 13230 and 13330 need aftermarket 20 in wheels, because the lifted knuckles correct the tie rod angle, and factory wheels are not compatible. Both kits list an 8 to 10 hour install.
Rough Country lists the 13000 for 2024-2026 RWD, and the 13100 for Colorado 4WD and RWD. Every other kit here is 4WD only.
Rough Country lists 1 to 2 hours for the 13000, 3 to 4 hours for the 13100 and 8 to 10 hours for the 13230 and 13330. No install time is listed for the Zone kits.