We earn a commission when you buy through links on this page. As an Amazon Associate I earn from qualifying purchases.
Draw-Tite Class 3 Trailer Hitch, 2 Inch Square Receiver (custom-fit)
A trailer hitch from Draw-Tite: 4,500 to 5,000 lb gross trailer weight. Draw-Tite makes it for 3 truck generations, each with its own part number and conditions.
- 2 part numbers
- 3 truck generations
- 2 available to buy
The Draw-Tite Class 3 Trailer Hitch, 2 Inch Square Receiver (custom-fit) in brief
Draw-Tite lists two part numbers in its Class 3 custom-fit line, both with a 2 inch square receiver and a black finish. Part 76557 is for the Ford Maverick, and part 75282 is for the Nissan Frontier and Suzuki Equator. Model years run 2005-2026, and the maker's site is draw-tite.com. The ratings differ by truck. The Maverick hitch lists a gross trailer weight of 4,500 lb, a tongue weight of 675 lb and a weight-distributing rating of 4,500 lb. The Frontier hitch lists 5,000 lb, 750 lb and 8,000 lb. Listed hitch weights are 27.2 lb for 76557 and 35.4 lb for 75282. Draw-Tite breaks each truck out by year. It lists the Maverick as 2022-2025 and 2026, at an install time of 60 minutes, and the Frontier as 2005-2025 and 2026, at 30 minutes. Neither listing states a wiring connector.
Part numbers, applications and specifications
-
76557
Draw-Tite 76557 Class 3 Trailer Hitch, 2 Inch Square Receiver, Black, Compatible with Ford Maverick
- Hitch classIII
- Receiver opening2
- Gross trailer weight rating4,500 lb
- Tongue weight rating675 lb
- Weight-distributing GTW4,500 lb
- Hitch weight27.2 lb
-
75282
Draw-Tite 75282 Class 3 Trailer Hitch, 2 Inch Square Receiver, Black, Compatible with Nissan Frontier : Suzuki Equator
- Hitch classIII
- Receiver opening2
- Gross trailer weight rating5,000 lb
- Tongue weight rating750 lb
- Weight-distributing GTW8,000 lb
- Drilling requiredno drilling
- Hitch weight35.4 lb
Which part number is yours
Match the number to the truck and read the drilling line on the Maverick listing. Part 76557 is for the Maverick, and Draw-Tite lists no exclusions. The listing contradicts itself on drilling: the spec field says Drilling Required: Yes, while the year-by-year fitment entries mark both year ranges as not requiring drilling. That leaves the question open, so confirm on the listing before you order. Install time is 60 minutes. Part 75282 is for the Frontier and the Suzuki Equator. Draw-Tite lists the Frontier 2005-2025 and 2026 as separate year ranges with a 30 minute install, no drilling, and no exclusions or notes. One part covers both Frontier generations, 2005-2021 and 2022-2026, so there is no second number to choose between. Check the tongue weight too. Draw-Tite prints 750 lb at a 5,000 lb gross trailer weight for 75282, while CURT prints 500 lb for its 5,000 lb Frontier hitch, 13241, so confirm the figure with Draw-Tite before you tow near the limit.
Trucks it fits
-
2022-2026 Ford Maverick
- Fits, 76557
Draw-Tite lists the 2022-2025 and 2026 Maverick separately, with a 60-minute install and no exclusions. It is Class 3 with a 4,500 lb gross trailer weight rating. Draw-Tite gives conflicting answers on drilling, so confirm with the maker before ordering.
-
2022-2026 Nissan Frontier
- Fits, 75282
Draw-Tite 75282 fits the Frontier 2005-2025 and 2026 (listed separately), takes about 30 minutes and needs no drilling. It has no listed exclusions, and one part covers both Frontier generations.
-
2005-2021 Nissan Frontier
- Fits, 75282
Draw-Tite 75282 fits the Frontier 2005-2025 and 2026 (listed separately), takes about 30 minutes and needs no drilling. It has no listed exclusions, and one part covers both Frontier generations.
Before you buy a trailer hitch
- Hitch classes explained
- Hitch receiver sizes and adapter ratings
- Tongue weight basics and the 10 to 15 percent rule
- Weight distribution hitches and how ratings change
- Trailer wiring connectors by type and circuit
Questions owners ask
Which Draw-Tite Class 3 hitch fits the Ford Maverick?
Part 76557 is listed for the Maverick, 2022-2025 and 2026 in two year ranges. It lists 4,500 lb gross trailer weight, 675 lb tongue weight and a 60 minute install time, with no exclusions listed.
Does the Draw-Tite 76557 need drilling?
Draw-Tite's listing is inconsistent. The spec field says Drilling Required: Yes, while the year-by-year fitment entries mark both year ranges as not requiring drilling. Confirm on the listing before ordering.
Does the Draw-Tite 75282 fit both generations of the Nissan Frontier?
Yes. Draw-Tite lists Frontier 2005-2025 and 2026 under one part, 75282, with no exclusions or notes. The install time is 30 minutes with no drilling, and the part also lists the Suzuki Equator.
What is the weight-distributing rating on the Draw-Tite Class 3 hitches?
Part 76557 lists 4,500 lb for weight-distributing gross trailer weight, and part 75282 lists 8,000 lb. The Frontier part lists 5,000 lb standard gross trailer weight and 750 lb tongue weight.